Filters
The Test Stand for Static Load Testing of Transmission shafts
The test stand for torsion, bending and combined load tests up to crack and stiffness measuring.
JT - Pohon, motory a paliva
- 2007 •
- X
Rok uplatnění
X - Nezařazeno
Device for testing of dynamic stiffness of composite rams
The unit serves for very precious determination of the ram dynamic stiffness. Especially first negative peak of the real part of dynamic stiffness is analysed. The comparison of the test sample dynamic stiffness wi...
JQ - Strojní zařízení a nástroje
- 2011 •
- Gfunk •
- Link
Rok uplatnění
Gfunk - Funkční vzorek
Výsledek na webu
Parallelogram Linkage for Testing Suspension Stiffness
A number of tram springs were tested for axial and radial stiffness. Radial stiffness was measured for various axial loads with an unknown position of the upper clamping device. Another limiting factor was the demand for ze...
JO - Pozemní dopravní systémy a zařízení
- 2016 •
- O
Rok uplatnění
O - Ostatní výsledky
Testing rig for measurements of stiffness of tooth wheels in contact
Testing rig for measurements of stiffness of a couple of tooth wheels, or pinion with the rack. Adjustable design enables measuring the couples of wheels with various diameters. Rotary encoders allow for separate evaluation of the t...
JQ - Strojní zařízení a nástroje
- 2011 •
- Gfunk •
- Link
Rok uplatnění
Gfunk - Funkční vzorek
Výsledek na webu
Comparative study of the stiffness modulus using selected test methods - 4-point bending test and indirect tensile test in the pavement layer
to evaluate asphalt mix performance. There are several tests for stiffness determination of stiffness tests measurements – indirect tensile test on cylindrical specimen with pulseStiffness of an ...
Civil engineering
- 2023 •
- D
Rok uplatnění
D - Stať ve sborníku
Automated Laboratory Workplace for Research of Engineering Equipment Drives
In article is described measurement on three test stands. On first test stand is measured pitting, on second test stand is measured static and dynamic torsion stiffness and on the third test stand is measu...
JR - Ostatní strojírenství
- 2010 •
- D
Rok uplatnění
D - Stať ve sborníku
Testing equipment for the measurement of the pure torsion stiffness of thin-walled members
The equipment allows the effective measurement of the pure tirsion stiffness of thin-walled members. It is usable for the experimental verification of the stiffness parameters of the members subjected to the pure torsion, especially...
JM - Inženýrské stavitelství
- 2010 •
- Gfunk
Rok uplatnění
Gfunk - Funkční vzorek
The pulsator for cyclic bending tests
This unigue testing machine was design for testing of stiffness reduction of composites. The machine consists of electric actuator, position sensor and load cell....
JI - Kompositní materiály
- 2015 •
- Gfunk •
- Link
Rok uplatnění
Gfunk - Funkční vzorek
Výsledek na webu
MEASUREMENT OF THE TORSIONAL STIFFNESS OF THE STABILIZER 16EV SWITCHING UNIT
This report describes the requirements for measuring and evaluating the static and dynamic torsional stiffness of the 16Ev unit sway stabilizer. A test stand was prepared in the testing room for operational strength and fat...
Mechanical engineering
- 2023 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Static Stiffness of Machine Tools
Static stiffness as one of the fundamental partameters of any machine tool. Theoretical approach. Experimental analysis of static stiffness. Methodology of Testing laboratory of the RCMT....
JQ - Strojní zařízení a nástroje
- 2010 •
- A •
- Link
Rok uplatnění
A - Audiovizuální tvorba
Výsledek na webu
- 1 - 10 out of 132 644