Filters
The production of hollow ingot with the mass of 100t at VHM a.s.
for the production of other hollow ingots at VHM a.s. in future.
Materials engineering
- 2018 •
- Ztech •
- Link
Rok uplatnění
Ztech - Ověřená technologie
Výsledek na webu
Comparison of VHM drills with different geometry
By experiments were comparised drills with different geometry from point of view durability. The results confirm major influence of tool geometry on its durability....
JR - Ostatní strojírenství
- 2011 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Analytical modelling and extraction of the modal behaviour of a cantilever beam in fluid interaction
When carrying out vibration health monitoring (VHM) of a structure it is usually assumed that the structure is in the absence of fluid interaction and/or that any environmental effects which can cause changes in the vibration response/gas en...
BI - Akustika a kmity
- 2007 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Device for controlled reduction of furnace slag during the oxidative melting at intensified EOP5
The report contains an updated production drawings of device for the controlled reduction of furnace slag at intesified electric arc furnace in VHM a.s. The report also provides optimized default device parameters....
JG - Hutnictví, kovové materiály
- 2015 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Evaluation of slag regime in ladle during utilization of briquetted synthetic slag in VHM a.s.
The paper focuses on evaluation of slag regime by the help of synthetic slags based on Al2O3. The comparion of influence of synthetic slags on the production of two chosen grades of steels focused on evaluation of effectivity of created refining slag...
JG - Hutnictví, kovové materiály
- 2012 •
- Jx •
- Link
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
The experience with replacement of primary raw materials with recycled slags in EAF in VHM a.s.
This paper describes the experience with the replacement of primary raw materials with recycled slags. Steelmaking technology at EAF is described with focusing on the slag regime. The achieved results in several campaigns are described. Chemical comp...
JG - Hutnictví, kovové materiály
- 2009 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
The experience eith replacement of primary raw materials with recycled slags in EAF in VHM a.s.
This paper describes the experience with the replacement of primary raw materials with recycled slags. Steelmaking technology at EAF is described with focusing on the slag regime. The achieved results in several campaigns are described. Chemical comp...
JG - Hutnictví, kovové materiály
- 2009 •
- D
Rok uplatnění
D - Stať ve sborníku
Selection of Usable Machine Technology for Crankshaft Manufacturing
Heavy Machinery a.s . (VHM).
JQ - Strojní zařízení a nástroje
- 2010 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Numerical modelling of the effects of consolidation on the undrained spudcan capacity under combined loading in silty clay
The paper shows the increase in vertical and combined horizontal and moment bearing capacity of jack-up spudcan installed in silty clay, when a load-hold period is accounted for. The numerical implementation of a hypoplastic model for structured clay...
Geology
- 2017 •
- Jimp •
- Link
Rok uplatnění
Jimp - Článek v periodiku v databázi Web of Science
Výsledek na webu
Study of Slag Regime at the Production of Alloyed Steels in EAF
of the company VHM a.s.
JG - Hutnictví, kovové materiály
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 25