Filters
Hot workability of INCO 718 superally evaluated by DMM method and by torsion test
Paper presented attestation of DDM for hot workability prediction. Hot workability of supper alloy INCO 71 was tested using DMM and classic torsion test and the results were compared. A strain rate and temperature ranges over witch optimum w...
JG - Hutnictví, kovové materiály
- 2003 •
- D
Rok uplatnění
D - Stať ve sborníku
Phase identification in Al-Si layer
This paper is focused on microstructural study of protective layers created by co-deposition of Al and Si on nickel-based superalloy INCO 713 LC after thermal exposition. The scanning and transmission electron microscopy with energy dispersi...
JG - Hutnictví, kovové materiály
- 2008 •
- D
Rok uplatnění
D - Stať ve sborníku
Autonomous acquisition of virtual reality models from real world scenes.
The article provides an overview of the joint research INCO-COPERNICUS project no. 960174 VIRTUOUS (Autonomous Acquisition of Virtual Reality Models from Real World Scenes). The article describes the project objectives, introduces t...
BD - Teorie informace
- 2001 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Design and Management of an Innovative Software Enterprise: A Case Study of a Spin-Off from University
In this paper, we characterize a management model named INnovation&COoperation (INCO) suitable for innovative software start-ups. We propose that the management processes and leadership of such enterprises have to have six disti...
IN - Informatika
- 2009 •
- D
Rok uplatnění
D - Stať ve sborníku
Intrinsic Workabilibty by Dynamic material Model and Torsion Test
The paper concerned with the test validity of DDM for hot workability prediction. C steel and supper alloy INCO 71 were tested using DMM and classic torsion test and the results were compared. A strain rate and temperature ranges over which ...
JG - Hutnictví, kovové materiály
- 2004 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Documentation on the Two INCO Working Programs: Review of the Adequacy of the Present Foodchain and Dose Calculations and Collection of the Data Required for Each Radioecological Region
Annotation not available...
BD - Teorie informace
- 1999 •
- Vx
Rok uplatnění
Vx - Nezařazeno - Výzkumná zpráva obsahující utajované informace (takový výsledek lze do RIV vložit pouze v případě, že zpráva obsahuje utajované informace a pole R12 = U), nebo souhrnná výzkumná zpráva
The Laboratory Tests of the CFD Model of the Air Age in Ventilated Room
The paper presents a brief overview of the air age theory and the result of the experiments from the laboratory of Department of Engineering Faculty of computer model (CFD) of the local mean age of air in a ventilated room. The test laborato...
BK - Mechanika tekutin
- 2002 •
- D
Rok uplatnění
D - Stať ve sborníku
Study of microstructure and mechanical properties of complex system layer - substrate
This paper is focused on microstructural study of protective layers created by co-deposition of Al and Si on nickel-based superalloy INCO 713 LC and INCO 738LC after thermal exposition and thermal-stress exploitation. The work also ...
JG - Hutnictví, kovové materiály
- 2008 •
- D
Rok uplatnění
D - Stať ve sborníku
Adding Value to Holy Grain: Providing the Key Tools for the Exploitation of Amaranth - the Protein-rich Grain of the Aztecs. Result from a Joint European - Latin American Research Project.
The project AMARANTH:FUTURE-FOOD (www.amaranth-future-food.net) was a joint research project financed by the European Commission in the Specific International Cooperation Activities (INCO) of the 6th Framework Programme. The project group co...
GC - Pěstování rostlin, osevní postupy
- 2010 •
- B
Rok uplatnění
B - Odborná kniha
Influence of Al-Si Layer on Structure of IN713LC and IN738LC
-deposition of Al and Si on nickel-base superalloys INCO 713 LC and INCO 738 LC after...
JG - Hutnictví, kovové materiály
- 2007 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 168 642