Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F19%3APU134262" target="_blank" >RIV/00216305:26110/19:PU134262 - isvavai.cz</a>
Alternative codes found
RIV/00216305:26110/20:PU135873
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
Original language description
This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 x 40 x 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurements
Czech name
—
Czech description
—

Project
<a href="/en/project/GJ18-12289Y" target="_blank" >GJ18-12289Y: Advanced characterization of cracks propagation in composites based on alkali activated matrix</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2019
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)