The Conversion of FE Model Between ANSYS and ADAMS System

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F02%3APU34136" target="_blank" >RIV/00216305:26210/02:PU34136 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
The Conversion of FE Model Between ANSYS and ADAMS System
Original language description
The development process in internal combustion engine at the present time requires CAE models that deliver the results for the concept phase of the prototype. The combustion engine is a very complex problem consisting of many partial problems. The majorproblem is the interaction of the crankshaft and crankcase. For more precise solution of this problem it is necessary to use complex 3-D models. Finite element method (FEM, ANSYS software) and Multi-Body Systems (MBS, ADAMS software) are suitable for thhe calculation of these problems. The finite element model is converted from ANSYS into ADAMS. The finite element models are too complicated for MBS and require a conversion. For the reduction of FE models the Craig-Bampton method has been used.
Czech name
—
Czech description
—

Project
<a href="/en/project/GA101%2F01%2F0027" target="_blank" >GA101/01/0027: Complex three-dimensional calculation models of a crank mechanism</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2002
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)