Cooling homogeneity measurement during hydraulic descaling in spray overlapping area

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F15%3APU114242" target="_blank" >RIV/00216305:26210/15:PU114242 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Cooling homogeneity measurement during hydraulic descaling in spray overlapping area

Original language description

Steel production is connected with high temperatures at which the steel reacts with oxygen in the surrounding atmosphere, creating scales on its surface. One of the most promising technologies for removing these scales when the steel is still very hot is hydraulic descaling. A row of high pressure flat jet water nozzles is usually used, with the feed pressure usually ranging between 10 and 40 MPa. The descaled material usually moves under the spraying nozzles. For most flat products, several nozzles arranged in a row must be used because the spray width of the nozzle is smaller than the width of the sprayed material. The steel surface where the scales are sprayed away by two adjacent nozzles is called the overlapping area. This area is dramatically overcooled during the typical configuration with an offset angle of 15° and an inclination angle of 15°. For this paper, both the typical and a new configuration with an offset angle of 0° were measured. Cooling homogeneity measurements were made to see the improvement in cooling homogeneity with the new configuration and spray impact pressure distribution measurements were made to see the size and shape of pressure distributions in the overlapping area for both configurations. Obtained results are presented and any improvement with the new configuration is discussed.

Czech name

—

Czech description

—

Type

D - Article in proceedings

CEP classification

JR - Other machinery industry

OECD FORD branch

—

Project

<a href="/en/project/LO1202" target="_blank" >LO1202: NETME CENTRE PLUS</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2015

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Article name in the collection

METAL 2015 24th International Conference on Metallurgy and Materials

ISBN

978-80-87294-58-1

ISSN

—

e-ISSN

—

Number of pages

6

Pages from-to

265-270

Publisher name

Tanger Ltd Ostrava

Place of publication

Ostrava

Event location

Brno

Event date

Jun 3, 2015

Type of event by nationality

WRD - Celosvětová akce

UT code for WoS article

000374706100039