Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F22%3APU144107" target="_blank" >RIV/00216305:26210/22:PU144107 - isvavai.cz</a>
Alternative codes found
RIV/68081723:_____/22:00554683 RIV/61989592:15310/22:73610190
Result on the web
<a href="https://www.mdpi.com/2075-4701/12/1/119" target="_blank" >https://www.mdpi.com/2075-4701/12/1/119</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.3390/met12010119" target="_blank" >10.3390/met12010119</a>

Result language
angličtina
Original language name
Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel
Original language description
Low-alloy 42CrMo4 steels were studied by Fe-57 Mossbauer spectroscopy (MS), X-ray diffractometry (XRD), and Energy Dispersive X-ray Spectroscopy (EDS) measurements. The investigations were performed on metallographic samples, which were subjected to a series of successive grinding and polishing with a progressively finer grit. Conversion X-ray Mossbauer spectroscopy (CXMS) was used to determine the occurrence of austenite in steel samples. It is a unique method detecting the austenite content very sensitively. Six samples with different surface preparation were investigated, starting with 4.8% of austenite on an as-cut sample, and a large decrease in the retained austenite to 2.6% was observed after the first grinding of a hardened cut sample. Additionally, an unexpectedly large decrease in the austenite content to 2.3% was found due to the final polishing. A second time applied successive grinding and polishing of all samples resulted in identical austenite content determined by CXMS of approx. 5%, which proved the applicability of the CXMS method. Generally, the result calls attention to the importance of preparation of metallurgical samples by grinding and polishing where the results can vary significantly on the level of surface processing.
Czech name
—
Czech description
—

Type
J<sub>imp</sub> - Article in a specialist periodical, which is included in the Web of Science database
CEP classification
—
OECD FORD branch
20501 - Materials engineering

Project
<a href="/en/project/EF17_049%2F0008408" target="_blank" >EF17_049/0008408: Hydrodynamic design of pumps</a><br>
Continuities
S - Specificky vyzkum na vysokych skolach

Publication year
2022
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)