BUTCube - 1U CubeSat demonstrator
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F23%3APR37486" target="_blank" >RIV/00216305:26210/23:PR37486 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
BUTCube - 1U CubeSat demonstrator
Original language description
The demonstrator was developed in accordance with a CubeSat standard for a 1U form-factor requirements. Main structural frame of the satellite was designed and manufactured from FDM 3D print PEEK (poly-ether-ether-ketone) material. The 6-parts frame construction is assembled together with bolt joints and shape locks. Custom deployment switch mechanism located in the frame rails was also designed. Inside, the CubeSat houses an electronic stack containing flight controller, communication and electric power system modules. The electronic box is connected to the CubeSat main structure through four long screws. Other modules such as sun sensors, access port and solar panels are attached to the structure from outside. The demonstrator is also equipped with 2MPx camera. BUTCube is capable of on-request picture taking and post processing demonstrating the flight mission and systems testing of connected modules, sensors and SW. Mechanical and electronic interfaces including deployment switch actuation of Electric Power System can be also used for CubeSat standardized modules testing.
Czech name
—
Czech description
—
Classification
Type
G<sub>prot</sub> - Prototype
CEP classification
—
OECD FORD branch
20304 - Aerospace engineering
Result continuities
Project
<a href="/en/project/EF19_073%2F0016948" target="_blank" >EF19_073/0016948: Quality internal grants at BUT</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Others
Publication year
2023
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Internal product ID
BUTCube 1U demonstrator
Numerical identification
182198
Technical parameters
Technická dokumentace je k dispozici v rámci projektu BUTCube - small satellite technology demonstrator development (ID32647) - TN 2&3. Materiály - PEEK, PCB, spojovací materiály, drobná elektronika. Inovativní 3D tištěná konstrukce integruje desky řídícího počítače, komunikačního systému a napájecího systému, dále desky solárních panelů.
Economical parameters
Řešeno v rámci projektu KING - Kvalitní interní granty VUT vprogramu OP VVV (reg. č.: CZ.02.2.69/0.0/0.0/19_073/0016948).
Application category by cost
—
Owner IČO
00216305
Owner name
Vysoké učení technické v Brně
Owner country
CZ - CZECH REPUBLIC
Usage type
A - K využití výsledku jiným subjektem je vždy nutné nabytí licence
Licence fee requirement
A - Poskytovatel licence na výsledek požaduje licenční poplatek
Web page
—