INCA D1.1 – OKaP rig design and licesing

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26722445%3A_____%2F21%3AN0000175" target="_blank" >RIV/26722445:_____/21:N0000175 - isvavai.cz</a>

Result on the web

—

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

INCA D1.1 – OKaP rig design and licesing

Original language description

An irradiation rig, called OKAP, was developed at Research Centre Rez (CVR) and will be used within the INCA JEEP project for irradiation of samples in the LVR-15 experimental reactor of CVR. The rig allows irradiation and subsequent assessment of irradiation induced creep of the cladding tube-type samples within the development of the accident tolerant fuels (ATF). In total, 16 tube-type samples with a length of 75 mm will be accommodated in the rig. Two substrate tubes materials (Opt. ZirloTM and E110 alloys) with various coatings will be irradiated at both pressurized and unpressurized conditions. A prototype of the OKAP rig has been developed, assembled and tested in the LVR-15 reactor. Subsequently, the rig was modified in order to achieve specific conditions required by the INCA JEEP project. In this report, the irradiation rig will be described including supporting neutronic and thermal analyses and a detailed description of the design. Moreover, the licensing procedure will be mentioned

Czech name

—

Czech description

—

Type

O - Miscellaneous

CEP classification

—

OECD FORD branch

20305 - Nuclear related engineering; (nuclear physics to be 1.3);

Project

—

Continuities

—

Publication year

2021

Confidentiality

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů