Effect of selected parameters on the surface waviness in plane milling of thermally modified birch wood
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F15%3A67897" target="_blank" >RIV/60460709:41320/15:67897 - isvavai.cz</a>
Result on the web
<a href="http://dx.doi.org/10.15376/biores.10.4.7618-7626" target="_blank" >http://dx.doi.org/10.15376/biores.10.4.7618-7626</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.10.4.7618-7626" target="_blank" >10.15376/biores.10.4.7618-7626</a>
Alternative languages
Result language
angličtina
Original language name
Effect of selected parameters on the surface waviness in plane milling of thermally modified birch wood
Original language description
This article focuses on the plane milling of thermally modified birch wood while taking into account technological parameters that have substantial effects on the processed wood surface?s average waviness profile deviation (Wa). The milling process was affected by the cutting speed, which varied from 20 to 60 m/s, with a feed rate of 4, 8, and 11 m/min. The results obtained on the set of thermally modified test specimens, were compared with the results obtained on test specimens without heat treatment.The surface finish was measured using various milling parameters. The material removal was 1 mm per pass. The results indicate that the thermal processing of wood did not significantly influence the arithmetic average deviation of the roughness profile (Ra). Cutting speed and feed rate had the most significant effects among the monitored factors. The lowest arithmetic average deviation of the roughness profile (Ra) was determined at a feed rate of 4 m/min and cutting speed of 40 m/s. An
Czech name
—
Czech description
—
Classification
Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JP - Industrial processes and processing
OECD FORD branch
—
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2015
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
BioResources
ISSN
1930-2126
e-ISSN
—
Volume of the periodical
10
Issue of the periodical within the volume
4
Country of publishing house
CZ - CZECH REPUBLIC
Number of pages
9
Pages from-to
7618-7626
UT code for WoS article
000366990800103
EID of the result in the Scopus database
—