K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F11%3A86081112" target="_blank" >RIV/61989100:27360/11:86081112 - isvavai.cz</a>
Alternative codes found
RIV/61989100:27710/11:86081112
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
K-CARBIDES PRECIPITATION IN TWO HIGH MANGANESE ALLOYS
Original language description
Two high Mn alloys marked A (24Mn-1.2C-12Al) and B (28Mn-0.7C-8.6Al) were laboratory hot rolled. After rolling in material A coarser k-carbides were detected, sporadically on the austenite grains boundaries and more frequently on the ferrite ones. Reasonwas un-balanced Mn a C contents in superposition with the rolling deformations and finishing rolling temperature of 950°C. Hardness corresponded to 432HV30 on average. Using light microscope no carbides on grains boundaries were observed in B both afterrolling and followed aging at 500°C/6´. After 6 minutes of aging the hardness of B was approx. by 9 % higher unlike the rolled state. The X-ray analysis nucleation of nano-size k-carbides confirmed. After aging of B at 500°C/30´ and/or 60´some coarser k-carbides were detected on ferrite-austenite boundaries and/or austenite-austenite interface. The hardness went up and corresponded to 343 and/or 350HV30. From the X-ray and microstructure analyses follows the 30´ and/or 60´ dwell support
Czech name
—
Czech description
—
Classification
Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JG - Metallurgy, metal materials
OECD FORD branch
—
Result continuities
Project
<a href="/en/project/ED0040%2F01%2F01" target="_blank" >ED0040/01/01: Regional materials science and technology centre</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)
Others
Publication year
2011
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Name of the periodical
Trends in the Development of Machinery and associated technology
ISSN
1840-4944
e-ISSN
—
Volume of the periodical
15
Issue of the periodical within the volume
1
Country of publishing house
BA - BOSNIA AND HERZEGOVINA
Number of pages
4
Pages from-to
169-172
UT code for WoS article
—
EID of the result in the Scopus database
—