Use of close range photogrammetry for documentation of structure parts deformation monitoring
The result's identifiers
Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00232624" target="_blank" >RIV/68407700:21110/16:00232624 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—
Alternative languages
Result language
angličtina
Original language name
Use of close range photogrammetry for documentation of structure parts deformation monitoring
Original language description
This paper presents an application of photogrammetrical methods for measuring the deformation of timber beam at sequential loading. Several load conditions were documented using correlation techniques and intersection photogrammetry. The progress of deformation was measured with a non-contact photogrammetrical method with the use of the image correlation technique. In this first experiment, a calibrated digital middle format camera Pentax was used for taking of photos. Agisoft Photoscan software was used for the deformation documentation. In the second experiment, three calibrated digital high resolution Canon cameras were used. The cameras were installed about 2 m from the measured object with the camera base approx. 3 m away. A computer controlled both cameras remotely and the images were saved to the hard drive in raw format. The images that were taken were synchronized in several intervals. On the object, cca 50 measured points were monitored for dynamical deformation. Photomodeler software was used in this case. As comparative models, measurements by the precise laser scanner Surphaser were done such as the direct measurement of deformations by potentiometers. The outputs shown, which all used non-traditional technology, are good enough for deformation measurement in sub-mm range.
Czech name
—
Czech description
—
Classification
Type
D - Article in proceedings
CEP classification
IN - Informatics
OECD FORD branch
—
Result continuities
Project
—
Continuities
S - Specificky vyzkum na vysokych skolach
Others
Publication year
2016
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Data specific for result type
Article name in the collection
Advances and Trends in Engineering Sciences and Technologies: Proceedings of the International Conference on Engineering Sciences and Technologies, 27-29 May 2015, Tatranská Štrba, High Tatras Mountains - Slovak Republic
ISBN
978-1-138-02907-1
ISSN
—
e-ISSN
—
Number of pages
4
Pages from-to
—
Publisher name
Taylor & Francis
Place of publication
London
Event location
Tatranská Štrba, High Tatras Mountains - Slovak
Event date
May 27, 2015
Type of event by nationality
WRD - Celosvětová akce
UT code for WoS article
—