Measurement Method of Feed-Rate Between a Tool and a Workpiece

Result code in IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F11%3A00187723" target="_blank" >RIV/68407700:21220/11:00187723 - isvavai.cz</a>
Result on the web
—
DOI - Digital Object Identifier
—

Result language
angličtina
Original language name
Measurement Method of Feed-Rate Between a Tool and a Workpiece
Original language description
The general concern of this article is to propose a measurementmethod of feed-rate between a tool and a workpiece during a machining operation. The task of feed-rate measurement has been conducted by putting a contactless position sensor to use. The sensor measures tool-path increments in given time intervals. The time interval is being constantly generated using an algorithm embedded in a microcontroller unit. The tool-path increments are therefore measured and recorded in an exact time loop. After a simple calculation a feed-rate can be determined. To be able to measure the feed rate between a tool and a workpiece the sensor has been installed into a custom made box which was then clamped right in the machine tool's spindle. Characteristic of measured feed rate is demonstrated in an example of four axis operation using a Haas ToolRoom Mill 1 machine tool. Another example is represented by five-axis operation on MAS MCV 1000 machining center. Thanks to the undertaken measurements it's
Czech name
—
Czech description
—

Type
J<sub>x</sub> - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)
CEP classification
JQ - Machinery and tools
OECD FORD branch
—

Project
<a href="/en/project/1M0507" target="_blank" >1M0507: Research of Production Engineering Technique and Technology</a><br>
Continuities
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year
2011
Confidentiality
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Similar results(10)