Modeling Cycle-to-Cycle Variations in 0-D/1-D Simulation by Means of Combustion Model Parameter Perturbations based on Statistics of Cycle-Resolved Data

Result code in IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F13%3A00229508" target="_blank" >RIV/68407700:21220/13:00229508 - isvavai.cz</a>

Result on the web

<a href="http://www.scopus.com/record/display.url?eid=2-s2.0-84878775298&origin=inward&txGid=6ADAE22518675D1BCC2C01A9A14CD40F.aqHV0EoE4xlIF3hgVWgA%3a2" target="_blank" >http://www.scopus.com/record/display.url?eid=2-s2.0-84878775298&origin=inward&txGid=6ADAE22518675D1BCC2C01A9A14CD40F.aqHV0EoE4xlIF3hgVWgA%3a2</a>

DOI - Digital Object Identifier

—

Result language

angličtina

Original language name

Modeling Cycle-to-Cycle Variations in 0-D/1-D Simulation by Means of Combustion Model Parameter Perturbations based on Statistics of Cycle-Resolved Data

Original language description

The presented paper deals with a methodology to model cycle-to-cycle variations (CCV) in 0-D/1-D simulation tools. This is achieved by introducing perturbations of combustion model parameters. To enable that, crank angle resolved data of individual cycles (pressure traces) have to be available for a reasonable number of engine cycles. Either experimental data or 3-D CFD results can be applied. In the presented work, experimental data of a single-cylinder research engine were considered while predicted LES 3-D CFD results will be tested in the future. Different engine operating points were selected - both stable ones (low CCV) and unstable ones (high CCV). The proposed methodology consists of two major steps. First, individual cycle data have to be matched with the 0-D/1- D model, i.e., combustion model parameters are varied to achieve the best possible match of pressure traces - an automated optimization approach is applied to achieve that. Second, the combustion model parameters (obtained in previous step) are statistically evaluated to obtain PDFs and cross-correlations. Then such information is imposed to the 0-D/1-D tool by means of both PDFs and cross-correlations of combustion model parameters to mimic pressure traces CCV. Statistics of different engine operating points are compared. The main conclusion is that the CCV effects are overestimated if cross-correlations are not taken into account. It was confirmed that turbulence properties and initial flame kernel development are the dominant factors in terms of CCV. These factors are not independent nor random - they seem to be correlated.

Czech name

—

Czech description

—

Type

J_x - Unclassified - Peer-reviewed scientific article (Jimp, Jsc and Jost)

CEP classification

JT - Propulsion, engines and fuels

OECD FORD branch

—

Project

<a href="/en/project/ED2.1.00%2F03.0125" target="_blank" >ED2.1.00/03.0125: Acquisition of Technology for Vehicle Center of Sustainable Mobility</a><br>

Continuities

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Publication year

2013

Confidentiality

C - Předmět řešení projektu podléhá obchodnímu tajemství (§ 504 Občanského zákoníku), ale název projektu, cíle projektu a u ukončeného nebo zastaveného projektu zhodnocení výsledku řešení projektu (údaje P03, P04, P15, P19, P29, PN8) dodané do CEP, jsou upraveny tak, aby byly zveřejnitelné.

Name of the periodical

SAE International Journal of Engines

ISSN

1946-3936

e-ISSN

—

Volume of the periodical

6

Issue of the periodical within the volume

2

Country of publishing house

US - UNITED STATES

Number of pages

24

Pages from-to

1075-1098

UT code for WoS article

—

EID of the result in the Scopus database

2-s2.0-84878775298