Filtry
Quality evaluation of case-hardened layer with respect to the crack formation and heat affection by grinding
The report is devoted to results of microstructure evaluation of case-hardened layer of gear wheels. Research work was oriented to the crack finding in case-hardened layer and to the finding of heat affection of
JG - Hutnictví, kovové materiály
- 2014 •
- O
Rok uplatnění
O - Ostatní výsledky
Load Capacity of Dynamically Loaded Gears with Different Case-Hardened Depth
The article describes the mechanical pulsation tests of carburized gears with different thickness of case-hardened depth and case-hardening technology, i.e. addition or removal of certain steps during the case<...
JR - Ostatní strojírenství
- 2016 •
- D •
- Odkaz
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
Experimental mechanical pulsation tests of gears with different case-hardened depth
The article describes the mechanical pulsation tests of carburized gears with different thickness of case-hardened depth and case-hardening technology, i.e. addition or removal of certain steps during the case<...
JR - Ostatní strojírenství
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
Fatigue Resistance of Case and Non Case Hardened Tubes with Defects on Inner Surface
In this article are compared results of fatigue tests of case and non case hardened tubes. Tests indicated that the fatigue resistance of the case hardened tubes was significantly higher. The main reason f...
JL - Únava materiálu a lomová mechanika
- 2010 •
- D
Rok uplatnění
D - Stať ve sborníku
Consultancy in the field of gear wheel case hardening technology changes
Consultancy was devoted to the possible changes of gear wheel case hardening technology in order to reduce retained austenite content in the case hardened layers. It included experimental analyses of the microstruc...
JG - Hutnictví, kovové materiály
- 2015 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Influence of Case Hardening on Fatigue Resistance of Models of Hollow Shafts with Production Surface Defects
This work analyses an influence of case hardening on fatigue resistance of the hollow shafts. Case hardened (on both sides) and non case hardened shafts were tested resistance of the case...
JL - Únava materiálu a lomová mechanika
- 2011 •
- Jx •
- Odkaz
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
FEM calculation of design of jig for testing of case hardening gears with different case hardened depth
Report dealing with FEM calculations of design jig for testing samples with different case hardened depth and pressure angles.
JR - Ostatní strojírenství
- 2012 •
- O
Rok uplatnění
O - Ostatní výsledky
Quality Evaluation Hardening Gears Method of Analysis Barkhausen Noise and X-ray Diffraction
treatment. This article deals with an evaluation of different methods of case-hardening technology. Evaluation of influence of the method of case-hardening to the surface quality of the components (in this cas...
JP - Průmyslové procesy a zpracování
- 2014 •
- Jx •
- Odkaz
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
Development of heat treatment procedure for a case-hardening steel
The aim of the investigation was to find a suitable heat treatment strategy without bainitic structure.
JG - Hutnictví, kovové materiály
- 2014 •
- Vsouhrn
Rok uplatnění
Vsouhrn - Souhrnná výzkumná zpráva
Possibilities of the utilization of nitriding on case-hardening steels
This paper studies the possibility of using plasma nitriding for treating case-hardening steels. For the experiment, the case-hardening steels equivalent 1.7131 (i. e. CSN 41 4220) and equivalent 1.5752 (i. e. CSN ...
Materials engineering
- 2020 •
- D •
- Odkaz
Rok uplatnění
D - Stať ve sborníku
Výsledek na webu
- 1 - 10 z 103 732