Filtry
Repeatability Test of strength of laser welds of new materials.
This report contains a repeatability test, which verified the reliability of the applied welding technology for the new material used for senzor housing....
JQ - Strojní zařízení a nástroje
- 2012 •
- Ztech
Rok uplatnění
Ztech - Ověřená technologie
Effect of Repeated Welding on the Mechanical Properties of Aluminium Alloys
This paper deal with possibility of heat-treatable Aluminium alloys (AlMgSi) welding, used at production of tracked vehicles. There are present results of these alloys welding intent on conventional arc welding methods....
JG - Hutnictví, kovové materiály
- 2007 •
- D
Rok uplatnění
D - Stať ve sborníku
Influence of Repair Welding on Weld Quality of Al Alloy EN AW 6082-T6
This article focuses on repeated repair GMAW welding of precipitation hardenable Al alloy EN AW 6082-T6. During GMAW welding it may occur that weld needs). Toobjectively estimate influence of repeated repa...
JJ - Ostatní materiály
- 2012 •
- D
Rok uplatnění
D - Stať ve sborníku
Influence of Repair Welding on Weld Quality of Al Alloy EN AW 6082-T6
This article focuses on repeated repair GMAW welding of precipitation hardenable Al alloy EN AW 6082-T6. During GMAW welding it may occur that weld needs). Toobjectively estimate influence of repeated repa...
JR - Ostatní strojírenství
- 2012 •
- D
Rok uplatnění
D - Stať ve sborníku
New technologies clamping and alignment of welded parts
The output of the project is designed welding jig - locating and clamping. This product is designed and technology provide easy welding parts in the unit and repeat accuracy of the resulting assembly....
JR - Ostatní strojírenství
- 2013 •
- Ztech
Rok uplatnění
Ztech - Ověřená technologie
Effect of Repeated Welding on the Mechanical Properties of Aluminium Alloys
This paper deal with possibility of heat-treatable Aluminium alloys (AlMgSi) welding, used at production of tracked vehicles. There are present results of these alloys welding intent on conventional arc welding methods....
JP - Průmyslové procesy a zpracování
- 2007 •
- D
Rok uplatnění
D - Stať ve sborníku
Detection of Weld Joins Production Repeatability of Ni Alloys by the Help of Solid State Nd:YAG Laser
This research is continuing previous experimental works deal with weldability of Ni heat-resistant alloys summarized in RR No. U12133/2008/003 and No. U12133/2008/004. The aim of this work is examination of record repeatability at optimized ...
JR - Ostatní strojírenství
- 2008 •
- O
Rok uplatnění
O - Ostatní výsledky
Laser Welding Parametrs of Aerospace Super-alloy Materials
The problem of high speed welding materials used in aerospace industry and not sacrificing their mechanical properties is still a current problem for all. The advantage of laser welding processes are : minimum HAZ, repeatability...
JG - Hutnictví, kovové materiály
- 2002 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Evaluation of Modern Power Source for GMAW Welding Equipped with Advanced Arc Control
Modern welding power sources are equipped with special functions of arc control. These functions measure and adjust welding parameters during welding with minimum time delay so that the right parameters are set. At the Labo...
JR - Ostatní strojírenství
- 2012 •
- Jx •
- Odkaz
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
JOINING OF NITINOL WITH STAINLESS STEEL IN MEDICAL CATHETER INTRODUCER
The experiment deals with NiTi + SS laser welding of catheter introducer with focus on joint strength and its standard deviation as representative of welding process repeatability. Of the proposed modifications, the LBW5-TZ...
Materials engineering
- 2020 •
- O
Rok uplatnění
O - Ostatní výsledky
- 1 - 10 z 14 910