Filters
Microstructural Evaluation of Rapidly Solidified Al-7Cr Melt Spun Ribbons
Rapidly solidified melt spun ribbons from Al - 7%Cr alloy were prepared under various conditions of melt spinning. As-solidified ribbons mostly exhibited heterogeneity represented by structural gradient due to non-...
JP - Průmyslové procesy a zpracování
- 2008 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Analytical methods suitable for rapidly solidified alloys
In this article, analytical methods suitable for investigation of rapidly solidified material were described and demonstrated on practical examples....
JG - Hutnictví, kovové materiály
- 2013 •
- D
Rok uplatnění
D - Stať ve sborníku
Evaluation of distribution coefficient of additions in metals during zone melting
The article appreciates up to date determination methods of equilibrium and effective distributing coefficient of admixture in metal after zonal melting andmethodof rapid solidified zone for determination keff of admixture in refrac...
JG - Hutnictví, kovové materiály
- 2001 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Experimental evaluation of distribution coefficients of admixtures in metals
of rapid solidified zone is used during electron beam zone melting (method floating by crystallization methods - zone melting and directional crystallization. Keff is evaluated by analysis ofconcentration profiles curves a...
JG - Hutnictví, kovové materiály
- 2001 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Phase analysis of the solidified KF-(LiF-NaF-UF4)-ZrF4 molten electrolytes for the electrowinning of uranium
in the solidified melts. The role of oxygen in argon atmosphere was found to be critical in the formation of uranium species during the melting and solidification. In order to reduceThe X-ray diffraction (XRD) phase analys...
CH - Jaderná a kvantová chemie, fotochemie
- 2014 •
- Jx •
- Link
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Výsledek na webu
Structure of rapidly solidified aluminium alloys
Rapidly solidified alloys prepared by melt spinning technique are produced in form of thin ribbons that exhibit structural gradient. On the cross section of the ribbon can be clearly distinguished two areas: the ultra rapidly so...
JG - Hutnictví, kovové materiály
- 2012 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Structure and Properties of PM Al-7Cr Alloy Prepared by Rapid Solidification
Rapidly solidified melt spun ribbons from Al - 7%Cr alloy were prepared under various conditions of melt spinning. As-solidified ribbons mostly exhibited heterogeneity represented by structural gradient due to non-...
JG - Hutnictví, kovové materiály
- 2008 •
- Jx
Rok uplatnění
Jx - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
Latent heats of melting and solidifying of real steel grades
The paper deals with the study of latent heats of melting and solidifying of real steel grades. Two real steel grades were investigated and values of latent heats of melting and solidifying were obtained. Latent he...
JG - Hutnictví, kovové materiály
- 2014 •
- D
Rok uplatnění
D - Stať ve sborníku
Influence of Technological Parameters on Filling of Injection Mold Cavity
Injection molding is very important plastic processing technology. Delivery of polymer melts into the mold cavity is the most important phase of the process. In the mold cavity the melt solidify and the product gain the fin...
JQ - Strojní zařízení a nástroje
- 2005 •
- D
Rok uplatnění
D - Stať ve sborníku
The effect of preparation methods on a microstructure of the Ni3Al-based alloys alloyed with molybdenum
with molybdenum by classical castings methods, such as an induction melting, is limited by a high melting point of molybdenum (2,623 °C). Decreasing of the melting point of the Ni-7Al-14Mo (wt. %) alloy by an induction
Materials engineering
- 2015 •
- D
Rok uplatnění
D - Stať ve sborníku
- 1 - 10 out of 8 271