Bond Joint Analysis of Thermoplastic Composite Made from Stacked Tailored Blanks
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00010669%3A_____%2F15%3A%230001909" target="_blank" >RIV/00010669:_____/15:#0001909 - isvavai.cz</a>
Nalezeny alternativní kódy
RIV/00010669:_____/16:N0000099
Výsledek na webu
<a href="http://www.scientific.net/AMM.827.161" target="_blank" >http://www.scientific.net/AMM.827.161</a>
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Bond Joint Analysis of Thermoplastic Composite Made from Stacked Tailored Blanks
Popis výsledku v původním jazyce
The interlaminar properties of a bond joint of stacked layers in a carbon fibre-reinforced composite with a thermoplastic matrix were evaluated under static loading. The un-precracked tension specimen with an external reinforcing layer was analysed in detail in the area of a bond joint. A detailed finite element method (FEM) analysis was performed to evaluate the influence of the bond joint shape on the interlaminar cohesive forces, which are simulated using the cohesive zone model (CZM). Simple lap andtapered joints were analysed. Continuum and shell elements were utilized in the FEM analysis, and the delamination results obtained using both solutions were compared to each other; however, no significant influence of the bond joint shape on the delamination onset was observed. The FEM analysis was supported using an experimental test on an un-precracked specimen made from prepreg with a carbon fibre fabric and a polyphenylene sulphide (PPS) matrix.
Název v anglickém jazyce
Bond Joint Analysis of Thermoplastic Composite Made from Stacked Tailored Blanks
Popis výsledku anglicky
The interlaminar properties of a bond joint of stacked layers in a carbon fibre-reinforced composite with a thermoplastic matrix were evaluated under static loading. The un-precracked tension specimen with an external reinforcing layer was analysed in detail in the area of a bond joint. A detailed finite element method (FEM) analysis was performed to evaluate the influence of the bond joint shape on the interlaminar cohesive forces, which are simulated using the cohesive zone model (CZM). Simple lap andtapered joints were analysed. Continuum and shell elements were utilized in the FEM analysis, and the delamination results obtained using both solutions were compared to each other; however, no significant influence of the bond joint shape on the delamination onset was observed. The FEM analysis was supported using an experimental test on an un-precracked specimen made from prepreg with a carbon fibre fabric and a polyphenylene sulphide (PPS) matrix.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JI - Kompositní materiály
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2015
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Applied Mechanics and Materials
ISSN
1662-7482
e-ISSN
—
Svazek periodika
2015
Číslo periodika v rámci svazku
827
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
8
Strana od-do
161-168
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—