JRP SIB51 Graphohm Report - D4.1.3 Report on cold finger with device holder

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00177016%3A_____%2F16%3AN0000018" target="_blank" >RIV/00177016:_____/16:N0000018 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

JRP SIB51 Graphohm Report - D4.1.3 Report on cold finger with device holder

Popis výsledku v původním jazyce

In close collaboration with CMI, METAS has designed heat-conductive parts of the cold finger that were implemented in the CMI's cryo-cooled setup. The cold finger was optimised to fit three devices: cryocooler, magnet and vacuum vessel. The cold finger was attached to the second stage of the cryocooler and transfers heat from the sample to the cryocooler. The cold finger consists of three parts, which are screwed together when installed in the vacuum vessel. The total length of the cold finger is set so the sample attached to the TO-8 holder fits the magnetic centre of the magnet (see deliverable 4.1.1 for dimensions of the magnet).

Název v anglickém jazyce

JRP SIB51 Graphohm Report - D4.1.3 Report on cold finger with device holder

Popis výsledku anglicky

In close collaboration with CMI, METAS has designed heat-conductive parts of the cold finger that were implemented in the CMI's cryo-cooled setup. The cold finger was optimised to fit three devices: cryocooler, magnet and vacuum vessel. The cold finger was attached to the second stage of the cryocooler and transfers heat from the sample to the cryocooler. The cold finger consists of three parts, which are screwed together when installed in the vacuum vessel. The total length of the cold finger is set so the sample attached to the TO-8 holder fits the magnetic centre of the magnet (see deliverable 4.1.1 for dimensions of the magnet).

Druh

V_souhrn - Souhrnná výzkumná zpráva

CEP obor

—

OECD FORD obor

20201 - Electrical and electronic engineering

Projekt

<a href="/cs/project/7AX13025" target="_blank" >7AX13025: Quantum resistance metrology based on graphene</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Počet stran výsledku

13

Místo vydání

Czech Republic

Název nakladatele resp. objednatele

EURAMET

Verze

—