INVESTIGATION OF MICROHARDNESS AND MICROSTRUCTURE OF AZ31 ALLOY AFTER HIGH PRESSURE TORSION

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216208%3A11320%2F11%3A10108741" target="_blank" >RIV/00216208:11320/11:10108741 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

INVESTIGATION OF MICROHARDNESS AND MICROSTRUCTURE OF AZ31 ALLOY AFTER HIGH PRESSURE TORSION

Popis výsledku v původním jazyce

Cast commercial magnesium alloy AZ31 was processed by high pressure torsion (HPT) at room temperature for 1, 3, 5 and 15 rotations (strain ranged from 1 to 7). Microstructure evolution with strain imposed by HPT was observed by light and electron microscopy. HPT was shown to be a very effective method of grain refinement. The initial coarse grain structure was refined by a factor of almost 200 already after one HPT turn (? ALMOST EQUAL TO 4). Mechanical properties were investigated by detailed 2-D microhardness measurements. HPT straining was found to introduce a radial inhomogeneity in the material which is manifested by a pronounced drop in the center and the maximum near the specimen periphery. With increasing strain due to HPT this inhomogeneity iscontinuously smeared out tending to saturate with increasing strain. Integrated 3-D meshes across the total surface of disks revealed the undulating character of microhardness variations. The strain imposed by HPT was shown to saturate w

Název v anglickém jazyce

INVESTIGATION OF MICROHARDNESS AND MICROSTRUCTURE OF AZ31 ALLOY AFTER HIGH PRESSURE TORSION

Popis výsledku anglicky

Cast commercial magnesium alloy AZ31 was processed by high pressure torsion (HPT) at room temperature for 1, 3, 5 and 15 rotations (strain ranged from 1 to 7). Microstructure evolution with strain imposed by HPT was observed by light and electron microscopy. HPT was shown to be a very effective method of grain refinement. The initial coarse grain structure was refined by a factor of almost 200 already after one HPT turn (? ALMOST EQUAL TO 4). Mechanical properties were investigated by detailed 2-D microhardness measurements. HPT straining was found to introduce a radial inhomogeneity in the material which is manifested by a pronounced drop in the center and the maximum near the specimen periphery. With increasing strain due to HPT this inhomogeneity iscontinuously smeared out tending to saturate with increasing strain. Integrated 3-D meshes across the total surface of disks revealed the undulating character of microhardness variations. The strain imposed by HPT was shown to saturate w

Druh

D - Stať ve sborníku

CEP obor

BM - Fyzika pevných látek a magnetismus

OECD FORD obor

—

Projekt

<a href="/cs/project/GA106%2F09%2F0482" target="_blank" >GA106/09/0482: Mechanické vlastnosti a vývoj mikrostruktury ultrajemnozrnných hořčíkových slitin připravených různými technologiemi</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Magnesium Technology 2011

ISBN

978-1-118-02936-7

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

589-593

Název nakladatele

Wiley

Místo vydání

Neuveden

Místo konání akce

San Diego

Datum konání akce

27. 2. 2011

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—