Změny v mikrostruktuře jako dodatečný indikátor teploty v antioxidačním ochranném povlaku Ni-Co-Cr-Al-Y.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216224%3A14310%2F04%3A00011651" target="_blank" >RIV/00216224:14310/04:00011651 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Microstructural changes as postmortem temperature indicator in Ni-Co-Cr-Al-Y oxidation protection coatings

Popis výsledku v původním jazyce

Microstructural changes in a metallic oxidation protection coating (Ni-Co-Cr-Al-Y) applied on a nickel base superalloy were investigated by means of scanning and transmission electron microscopy. The changes are due either to thermal mechanical fatigue testing under high thermal gradients or to defined isothermal heat treatments. The coated specimens were quenched from temperatures between 840 and 1100 C to ambient temperature. The resultant phases, their local distribution and compositions were determined by energy dispersive X-ray (EDX) spectroscopy and electron diffraction. Phase equilibria at respective temperatures were determined by thermodynamic calculations based on the CALPHAD method. The calculated and experimentally determined phase distributions were compared. A particular microstructural feature, namely the existence and spatial distribution of spherical gamma' Ni3Al precipitates in the coating and the diffusion zone between substrate and coating, was used as a postmortem

Název v anglickém jazyce

Microstructural changes as postmortem temperature indicator in Ni-Co-Cr-Al-Y oxidation protection coatings

Popis výsledku anglicky

Microstructural changes in a metallic oxidation protection coating (Ni-Co-Cr-Al-Y) applied on a nickel base superalloy were investigated by means of scanning and transmission electron microscopy. The changes are due either to thermal mechanical fatigue testing under high thermal gradients or to defined isothermal heat treatments. The coated specimens were quenched from temperatures between 840 and 1100 C to ambient temperature. The resultant phases, their local distribution and compositions were determined by energy dispersive X-ray (EDX) spectroscopy and electron diffraction. Phase equilibria at respective temperatures were determined by thermodynamic calculations based on the CALPHAD method. The calculated and experimentally determined phase distributions were compared. A particular microstructural feature, namely the existence and spatial distribution of spherical gamma' Ni3Al precipitates in the coating and the diffusion zone between substrate and coating, was used as a postmortem

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CF - Fyzikální chemie a teoretická chemie

OECD FORD obor

—

Projekt

<a href="/cs/project/GA106%2F02%2F0876" target="_blank" >GA106/02/0876: Teoretické a experimentální studium modelových soustav na bázi niklu a termodynamický popis fázových rovnováh</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2004

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Materials Science and Engineering A

ISSN

0921-5093

e-ISSN

—

Svazek periodika

384

Číslo periodika v rámci svazku

1-2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

10

Strana od-do

162-171

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—