Controlling Size and Morphology of Copper and Copper-Nickel Nanoparticles Supported on Porous Silica for Catalytic Ethanol Dehydrogenation

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216224%3A14310%2F21%3A00134134" target="_blank" >RIV/00216224:14310/21:00134134 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Controlling Size and Morphology of Copper and Copper-Nickel Nanoparticles Supported on Porous Silica for Catalytic Ethanol Dehydrogenation

Popis výsledku v původním jazyce

Controlling size and morphology of copper and copper-nickel nanoparticles supported on porous silica for catalytic ethanol dehydrogenation In heterogeneous catalysis, unique nanoparticles’ properties, especially a high percentage of surface atoms, are highly desired. Copper nanoparticles are active in (bio)ethanol dehydrogenation producing acetaldehyde. This catalytic reaction presents the first step in 1,3-butadiene production from ethanol and could become a sustainable substitution for current acetaldehyde and butadiene production (based on oil refinement). This research project deals with various copper and copper-nickel silica-supported nanoparticles synthesized by different methods: solvothermal hot-injection, dry impregnation, electrostatic impregnation, hydrolytic and non-hydrolytic sol-gel. Various synthetic methods offer metal nanoparticles with different morphologies, sizes (from atomic dispersion to 20 nm), and particle size distributions. Several techniques were used to study these catalysts: scanning transmission electron microscopy combined with electron dispersive spectroscopy, nitrogen porosimetry, thermogravimetry, x-ray photoelectron spectroscopy, and inductively coupled plasma atomic emission spectroscopy. The catalytic performance of prepared catalysts was tested in the ethanol dehydrogenation in a gas-phase fixed-bed catalytic reactor. Light-off catalyst curves were established from 180 °C to 290 °C; stability with time-on-stream was tested at 325 °C for 10 hours. Copper nanoparticles are highly active and selective in the desired reaction (up to 89 % ethanol conversion at 250 °C) but suffer from coking and particle sintering, hampering their long-term stability. Nickel addition enhanced low-temperature catalyst performance. However, the catalyst’s stability needs to be further improved. The work has been financially supported by the Czech Science Foundation under the project GJ20-03636Y.

Název v anglickém jazyce

Controlling Size and Morphology of Copper and Copper-Nickel Nanoparticles Supported on Porous Silica for Catalytic Ethanol Dehydrogenation

Popis výsledku anglicky

Controlling size and morphology of copper and copper-nickel nanoparticles supported on porous silica for catalytic ethanol dehydrogenation In heterogeneous catalysis, unique nanoparticles’ properties, especially a high percentage of surface atoms, are highly desired. Copper nanoparticles are active in (bio)ethanol dehydrogenation producing acetaldehyde. This catalytic reaction presents the first step in 1,3-butadiene production from ethanol and could become a sustainable substitution for current acetaldehyde and butadiene production (based on oil refinement). This research project deals with various copper and copper-nickel silica-supported nanoparticles synthesized by different methods: solvothermal hot-injection, dry impregnation, electrostatic impregnation, hydrolytic and non-hydrolytic sol-gel. Various synthetic methods offer metal nanoparticles with different morphologies, sizes (from atomic dispersion to 20 nm), and particle size distributions. Several techniques were used to study these catalysts: scanning transmission electron microscopy combined with electron dispersive spectroscopy, nitrogen porosimetry, thermogravimetry, x-ray photoelectron spectroscopy, and inductively coupled plasma atomic emission spectroscopy. The catalytic performance of prepared catalysts was tested in the ethanol dehydrogenation in a gas-phase fixed-bed catalytic reactor. Light-off catalyst curves were established from 180 °C to 290 °C; stability with time-on-stream was tested at 325 °C for 10 hours. Copper nanoparticles are highly active and selective in the desired reaction (up to 89 % ethanol conversion at 250 °C) but suffer from coking and particle sintering, hampering their long-term stability. Nickel addition enhanced low-temperature catalyst performance. However, the catalyst’s stability needs to be further improved. The work has been financially supported by the Czech Science Foundation under the project GJ20-03636Y.

Druh

O - Ostatní výsledky

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/GJ20-03636Y" target="_blank" >GJ20-03636Y: Nové katalyzátory pro přípravu 1,3-butadienu z ethanolu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů