Repair mortar for a coloured layer of sgraffito render - a technological copy

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216275%3A25110%2F22%3A39919955" target="_blank" >RIV/00216275:25110/22:39919955 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68378297:_____/22:00561611

Výsledek na webu

<a href="https://hdl.handle.net/11104/0334297" target="_blank" >https://hdl.handle.net/11104/0334297</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Repair mortar for a coloured layer of sgraffito render - a technological copy

Popis výsledku v původním jazyce

Sgraffito technique was used to decorate renders by scratching the top layer of limewash in the Renaissance time. This technique required both artistic and craft skills and its quality anddurability relied on the selected materials. In order to contribute to the preservation of survivingsgraffiti in the town of Slavonice in the Czech Republic a study was carried out assessing the possibilityto replicate the original materials and the application techniques. Historical sgraffito layers weresampled in situ and studied in a laboratory by commonly used analytical methods - OM, TA, XRD, SEMEDS.The raw materials, lime binder and sand, were characterised and the mixing proportion app. 1 to0.7 (vol.) of lime putty to sand was determined. The character of the raw materials was compared withthe locally known resources and their probable provenance was localised. Based on the character ofthe local limestone, a similar raw material was obtained and burnt in an experimental lime kiln toproduce quicklime. The sand was obtained locally from an old and disused pit quarry. The possibilityto obtain the raw materials that came from similar sources as the historic ones allowed us to studypossible production technologies and application techniques. The ways the raw materials wereprocessed and the mortar applied were verified by a series of practical experiments. These includedthe use of lime putty v. dry slaked hydrate, the thickness of a layer, trowelling and final finishing, timespan before application of lime wash, timing of drawing and scratching. In addition, the performanceof the produced mortar mix was assessed by mechanical and physical tests. Compressive and flexuralstrengths, capillary absorption, drying index, open porosity and water vapour diffusion coefficientwere determined on standard prism specimens as well as on mortar specimens cut from wall panels.The mortar was tested in two sets with different consistencies due to mixing water content. The testspointed out the influence of application methods on the performance. The mortar properties werepositively evaluated especially in terms of porous structure and water vapour permeability. Themortar, designed as a material replica of the original, was used in a conservation project on a façadeof a house, where missing parts of a sgraffito render were reconstructed.

Název v anglickém jazyce

Repair mortar for a coloured layer of sgraffito render - a technological copy

Popis výsledku anglicky

Sgraffito technique was used to decorate renders by scratching the top layer of limewash in the Renaissance time. This technique required both artistic and craft skills and its quality anddurability relied on the selected materials. In order to contribute to the preservation of survivingsgraffiti in the town of Slavonice in the Czech Republic a study was carried out assessing the possibilityto replicate the original materials and the application techniques. Historical sgraffito layers weresampled in situ and studied in a laboratory by commonly used analytical methods - OM, TA, XRD, SEMEDS.The raw materials, lime binder and sand, were characterised and the mixing proportion app. 1 to0.7 (vol.) of lime putty to sand was determined. The character of the raw materials was compared withthe locally known resources and their probable provenance was localised. Based on the character ofthe local limestone, a similar raw material was obtained and burnt in an experimental lime kiln toproduce quicklime. The sand was obtained locally from an old and disused pit quarry. The possibilityto obtain the raw materials that came from similar sources as the historic ones allowed us to studypossible production technologies and application techniques. The ways the raw materials wereprocessed and the mortar applied were verified by a series of practical experiments. These includedthe use of lime putty v. dry slaked hydrate, the thickness of a layer, trowelling and final finishing, timespan before application of lime wash, timing of drawing and scratching. In addition, the performanceof the produced mortar mix was assessed by mechanical and physical tests. Compressive and flexuralstrengths, capillary absorption, drying index, open porosity and water vapour diffusion coefficientwere determined on standard prism specimens as well as on mortar specimens cut from wall panels.The mortar was tested in two sets with different consistencies due to mixing water content. The testspointed out the influence of application methods on the performance. The mortar properties werepositively evaluated especially in terms of porous structure and water vapour permeability. Themortar, designed as a material replica of the original, was used in a conservation project on a façadeof a house, where missing parts of a sgraffito render were reconstructed.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/DG20P02OVV028" target="_blank" >DG20P02OVV028: Možnosti radiouhlíkového datování historických malt</a><br>

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of the 6th Historic Mortars Conference - HMC 2022

ISBN

978-961-6884-77-8

ISSN

—

e-ISSN

—

Počet stran výsledku

15

Strana od-do

235-248

Název nakladatele

University of Ljubljana

Místo vydání

Lublaň

Místo konání akce

Lublaň

Datum konání akce

21. 9. 2022

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—