Vlastnosti antikorozních pigmentů různého složení v závislosti na jejich koncentraci

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216275%3A25310%2F06%3A00004441" target="_blank" >RIV/00216275:25310/06:00004441 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Properties of Anticorrosion Pigments Depending on Their Chemical Composition and PVC Value

Popis výsledku v původním jazyce

Anticorrosion pigments from a group of nontoxic substances were chosen and compared with a chromate pigment. With all pigments the following parameters were observed: oil absorption, CPVC value, density, extract pH, specific surface, particle size, water-borne substances content, and the specific electrical conductivity of pigment extracts. The aqueous extracts of pigments were used to determine the corrosion loss of steel. The morphology of pigment particles was observed by means of an electron scanning microscope. Paints containing these pigments were formulated on the binder basis of an epoxy resin. The prepared paints were subjected to the measurement of physical-mechanical properties such as hardness and resistance in deep drawing. Paints containing anticorrosion pigments were exposed to corrosion tests in a SO2 condenser chamber, salt spray cabinet and to a test according to Machu and Schiffman.

Název v anglickém jazyce

Properties of Anticorrosion Pigments Depending on Their Chemical Composition and PVC Value

Popis výsledku anglicky

Anticorrosion pigments from a group of nontoxic substances were chosen and compared with a chromate pigment. With all pigments the following parameters were observed: oil absorption, CPVC value, density, extract pH, specific surface, particle size, water-borne substances content, and the specific electrical conductivity of pigment extracts. The aqueous extracts of pigments were used to determine the corrosion loss of steel. The morphology of pigment particles was observed by means of an electron scanning microscope. Paints containing these pigments were formulated on the binder basis of an epoxy resin. The prepared paints were subjected to the measurement of physical-mechanical properties such as hardness and resistance in deep drawing. Paints containing anticorrosion pigments were exposed to corrosion tests in a SO2 condenser chamber, salt spray cabinet and to a test according to Machu and Schiffman.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2006

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Pigment & Resin Technology

ISSN

0369-9420

e-ISSN

—

Svazek periodika

35

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

12

Strana od-do

188-199

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—