Study of physical-mechanical and anticorrosion properties of polymer coatings based on epoxy resin containing nonisometric zincferrite particles

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216275%3A25310%2F13%3A39896941" target="_blank" >RIV/00216275:25310/13:39896941 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Study of physical-mechanical and anticorrosion properties of polymer coatings based on epoxy resin containing nonisometric zincferrite particles

Popis výsledku v původním jazyce

Anticorrosion ferrites were prepared from oxides or carbonates through a high-temperature process during a solid phase. The formulated zincferrites had a nodular, lamellar, and needle-shaped particles. The synthesized anticorrosion pigments were used toprepare epoxy-resin based coatings that were subjected to tests for determining of physical-mechanical properties and anticorrosion properties. The synthesized anticorrosion pigments were used to formulate epoxy coatings with PVC = 10 % for the synthesized pigment and with the PVC/CPVC ratio = 0.3. The coatings were tested for physical-mechanical properties and in corrosion atmospheres. The corrosion tests results were compared with aluminum zinc phosphomolybdate. Comparisons of the lamellar ferrites with regard to the combinations of the Mg-Zn and Ca-Zn cations serve to detect the relatively stronger anticorrosion effects of the ferrites that contain the Ca-Zn combination. Of great benefit are the application and the method of synthesi

Název v anglickém jazyce

Study of physical-mechanical and anticorrosion properties of polymer coatings based on epoxy resin containing nonisometric zincferrite particles

Popis výsledku anglicky

Anticorrosion ferrites were prepared from oxides or carbonates through a high-temperature process during a solid phase. The formulated zincferrites had a nodular, lamellar, and needle-shaped particles. The synthesized anticorrosion pigments were used toprepare epoxy-resin based coatings that were subjected to tests for determining of physical-mechanical properties and anticorrosion properties. The synthesized anticorrosion pigments were used to formulate epoxy coatings with PVC = 10 % for the synthesized pigment and with the PVC/CPVC ratio = 0.3. The coatings were tested for physical-mechanical properties and in corrosion atmospheres. The corrosion tests results were compared with aluminum zinc phosphomolybdate. Comparisons of the lamellar ferrites with regard to the combinations of the Mg-Zn and Ca-Zn cations serve to detect the relatively stronger anticorrosion effects of the ferrites that contain the Ca-Zn combination. Of great benefit are the application and the method of synthesi

Druh

D - Stať ve sborníku

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Conference Proceedings CCT 2013

ISBN

978-80-7395-627-1

ISSN

—

e-ISSN

—

Počet stran výsledku

8

Strana od-do

155-162

Název nakladatele

Univerzita Pardubice

Místo vydání

Pardubice

Místo konání akce

Pardubice

Datum konání akce

20. 5. 2013

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—