Role of Nb in the failure of dual-phase steel in heterogeneous welds

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216275%3A25510%2F20%3A39916170" target="_blank" >RIV/00216275:25510/20:39916170 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/abs/pii/S1350630720308384?via%3Dihub" target="_blank" >https://www.sciencedirect.com/science/article/abs/pii/S1350630720308384?via%3Dihub</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.engfailanal.2020.104708" target="_blank" >10.1016/j.engfailanal.2020.104708</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Role of Nb in the failure of dual-phase steel in heterogeneous welds

Popis výsledku v původním jazyce

The use of Cr-Ni austenitic steel interlayers is an effective solution for heterogeneous welds, especially in combination with high-carbon steels. High contact-fatigue resistance and resistance to impact loads are required in the case of railway crossing applications. The failure of Nb-alloyed cast Cr-Ni austenitic steel used as an insert in the flash butt resistance weld of Hadfield steel with carbon steel is the subject of the presented analyses. The identification of the failure mechanism is based on light and scanning electron microscopy and energy dispersive X-ray analyses, including electron backscattered analyses. The initiation of hot-crack defects is detected in the heat affected zone (HAZ). In contrast to the usual conditions for the formation of hot cracks in the HAZ, cracks are found solely outside the superheating zone. The decisive influence of Nb-based intermetallics formed at the phase interface of delta-ferrite and the austenitic matrix is indicated. The eutectics formation between niobium carbonitrides and the austenitic matrix is assumed to be responsible for the hot-cracking susceptibility of austenitic steel. The particular combination of the temperature gradient together with the chemical gradient leading to a localization of the critical zone is documented. The paper describes the influence of carbon redistribution at the weld interface on the morphology of delta-ferrite in different layers of the heat-affected zone. Induced structural differences are associated with Nb-particle formation. Fractographic analyses show the formation of low-melting phases in the critical layer of the HAZ. The influence of secondary phases, especially Nb-eutectic, on the degradation of austenitic steel plasticity is documented.

Název v anglickém jazyce

Role of Nb in the failure of dual-phase steel in heterogeneous welds

Popis výsledku anglicky

The use of Cr-Ni austenitic steel interlayers is an effective solution for heterogeneous welds, especially in combination with high-carbon steels. High contact-fatigue resistance and resistance to impact loads are required in the case of railway crossing applications. The failure of Nb-alloyed cast Cr-Ni austenitic steel used as an insert in the flash butt resistance weld of Hadfield steel with carbon steel is the subject of the presented analyses. The identification of the failure mechanism is based on light and scanning electron microscopy and energy dispersive X-ray analyses, including electron backscattered analyses. The initiation of hot-crack defects is detected in the heat affected zone (HAZ). In contrast to the usual conditions for the formation of hot cracks in the HAZ, cracks are found solely outside the superheating zone. The decisive influence of Nb-based intermetallics formed at the phase interface of delta-ferrite and the austenitic matrix is indicated. The eutectics formation between niobium carbonitrides and the austenitic matrix is assumed to be responsible for the hot-cracking susceptibility of austenitic steel. The particular combination of the temperature gradient together with the chemical gradient leading to a localization of the critical zone is documented. The paper describes the influence of carbon redistribution at the weld interface on the morphology of delta-ferrite in different layers of the heat-affected zone. Induced structural differences are associated with Nb-particle formation. Fractographic analyses show the formation of low-melting phases in the critical layer of the HAZ. The influence of secondary phases, especially Nb-eutectic, on the degradation of austenitic steel plasticity is documented.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach<br>I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2020

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Engineering Failure Analysis

ISSN

1350-6307

e-ISSN

—

Svazek periodika

116

Číslo periodika v rámci svazku

october 2020

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

13

Strana od-do

—

Kód UT WoS článku

000567791900008

EID výsledku v databázi Scopus

—