Testing of Action of Direct Flame on Concrete

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F15%3APU113089" target="_blank" >RIV/00216305:26110/15:PU113089 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1155/2015/371913" target="_blank" >http://dx.doi.org/10.1155/2015/371913</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1155/2015/371913" target="_blank" >10.1155/2015/371913</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Testing of Action of Direct Flame on Concrete

Popis výsledku v původním jazyce

The paper states results of experimental exposition of concrete test specimens to direct flame. Concrete test specimens made from various mixtures differing in the type of aggregate, binder, dispersed reinforcement, and technological procedure were subjected to thermal load. Physicomechanical and other properties of all test specimens were tested before exposition to open flame: density, compressive strength, flexural strength, moisture content, and surface appearance. The specimens were visually observed during exposition to open flame and changes were recorded. Exposed surface was photographically documented before thermal load and at 10-minute intervals. Development of temperature of the specimens was documented with a thermocamera. After exposition to thermal load and cooling down, concrete specimens were visually observed, network of cracks was photographically documented, and maximal depth of spalled area was measured.

Název v anglickém jazyce

Testing of Action of Direct Flame on Concrete

Popis výsledku anglicky

The paper states results of experimental exposition of concrete test specimens to direct flame. Concrete test specimens made from various mixtures differing in the type of aggregate, binder, dispersed reinforcement, and technological procedure were subjected to thermal load. Physicomechanical and other properties of all test specimens were tested before exposition to open flame: density, compressive strength, flexural strength, moisture content, and surface appearance. The specimens were visually observed during exposition to open flame and changes were recorded. Exposed surface was photographically documented before thermal load and at 10-minute intervals. Development of temperature of the specimens was documented with a thermocamera. After exposition to thermal load and cooling down, concrete specimens were visually observed, network of cracks was photographically documented, and maximal depth of spalled area was measured.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/GAP104%2F12%2F1988" target="_blank" >GAP104/12/1988: Studium interakce složek cementových kompozitů při působení vysokých teplot</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

The Scientific World Journal

ISSN

1537-744X

e-ISSN

—

Svazek periodika

2015

Číslo periodika v rámci svazku

2015

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

8

Strana od-do

1-8

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-84924275252