Contribution to the issue of evaluating the compressive strength of concrete exposed to high temperatures using the Schmidt rebound hammer

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F16%3APU115647" target="_blank" >RIV/00216305:26110/16:PU115647 - isvavai.cz</a>

Výsledek na webu

<a href="https://link.springer.com/article/10.1134/S1061830916010046" target="_blank" >https://link.springer.com/article/10.1134/S1061830916010046</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Contribution to the issue of evaluating the compressive strength of concrete exposed to high temperatures using the Schmidt rebound hammer

Popis výsledku v původním jazyce

Concrete properties change as a result of ambient conditions. The internal microstructure changes under high temperatures. As a consequence, this change affects both physical and mechanical properties of concrete and therefore the parameters determined from non-destructive testing. It was determined that for concrete exposed to temperatures in the range of 200 °C to 400 °C the rebound number measured by the rebound hammer is approximately 9 % higher after heat load than for wet concrete placed in a standard environment. Temperatures from 600 °C to 800 °C cause a drop in the rebound number, which correlates with a decrease in the concrete´s compressive strength. A strength dependency was established for the N-type Schmidt rebound hammer expressing the relationship between the rebound number and the compressive strength of concrete exposed to heat load, which is characterized by a high correlation between variables (correlation coefficient is 0.98). To estimate the compressive strength of concrete in a structure which has been exposed by fire, can be used both the calculated strength relationship, both the calibration curves for N-type Schmidt rebound hammer calculated by manufacturer, eventually the basic curve from CSN EN 13791. If the calibration equation for N-type Schmidt rebound hammer or basic curve of CSN EN 13791 is taken, the calculated strength for the rebound numbers should be lowered using the corrective coefficient, the value of which is 0.54, respectively 0.65.

Název v anglickém jazyce

Contribution to the issue of evaluating the compressive strength of concrete exposed to high temperatures using the Schmidt rebound hammer

Popis výsledku anglicky

Concrete properties change as a result of ambient conditions. The internal microstructure changes under high temperatures. As a consequence, this change affects both physical and mechanical properties of concrete and therefore the parameters determined from non-destructive testing. It was determined that for concrete exposed to temperatures in the range of 200 °C to 400 °C the rebound number measured by the rebound hammer is approximately 9 % higher after heat load than for wet concrete placed in a standard environment. Temperatures from 600 °C to 800 °C cause a drop in the rebound number, which correlates with a decrease in the concrete´s compressive strength. A strength dependency was established for the N-type Schmidt rebound hammer expressing the relationship between the rebound number and the compressive strength of concrete exposed to heat load, which is characterized by a high correlation between variables (correlation coefficient is 0.98). To estimate the compressive strength of concrete in a structure which has been exposed by fire, can be used both the calculated strength relationship, both the calibration curves for N-type Schmidt rebound hammer calculated by manufacturer, eventually the basic curve from CSN EN 13791. If the calibration equation for N-type Schmidt rebound hammer or basic curve of CSN EN 13791 is taken, the calculated strength for the rebound numbers should be lowered using the corrective coefficient, the value of which is 0.54, respectively 0.65.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Defektoskopiya

ISSN

0130-3082

e-ISSN

—

Svazek periodika

2016

Číslo periodika v rámci svazku

01

Stát vydavatele periodika

RU - Ruská federace

Počet stran výsledku

11

Strana od-do

55-66

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—