Application of Acoustic Emission on the Characterization of Micro Cracks during Three-point Bending Test on Thermal-stressed Concrete Specimens

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F16%3APU121795" target="_blank" >RIV/00216305:26110/16:PU121795 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Application of Acoustic Emission on the Characterization of Micro Cracks during Three-point Bending Test on Thermal-stressed Concrete Specimens

Popis výsledku v původním jazyce

Concrete structures could be exposed to extreme temperature conditions. Examples of such conditions are concrete foundations for launching rockets carrying spaceships, concrete structures in nuclear power stations or those accidentally exposed to fire, for instance in the case of tunnel fires. This paper analyses acoustic emission signals captured during three-point bending test on thermal-stressed concrete specimens. The method of acoustic emission is an experimental tool suitable for monitoring of the failure processes in materials. The typical parameters of acoustic emission signal were identified during the acoustic emission records for different concrete specimens to further describe the under-thestress behavior and failure development. The amount of crack growth was continuously monitored using four acoustic emission sensors mounted on the specimens.

Název v anglickém jazyce

Application of Acoustic Emission on the Characterization of Micro Cracks during Three-point Bending Test on Thermal-stressed Concrete Specimens

Popis výsledku anglicky

Concrete structures could be exposed to extreme temperature conditions. Examples of such conditions are concrete foundations for launching rockets carrying spaceships, concrete structures in nuclear power stations or those accidentally exposed to fire, for instance in the case of tunnel fires. This paper analyses acoustic emission signals captured during three-point bending test on thermal-stressed concrete specimens. The method of acoustic emission is an experimental tool suitable for monitoring of the failure processes in materials. The typical parameters of acoustic emission signal were identified during the acoustic emission records for different concrete specimens to further describe the under-thestress behavior and failure development. The amount of crack growth was continuously monitored using four acoustic emission sensors mounted on the specimens.

Druh

O - Ostatní výsledky

CEP obor

JN - Stavebnictví

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů