Fired hydraulic binder based on fluidized combustion fly ash

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F17%3APU123016" target="_blank" >RIV/00216305:26110/17:PU123016 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.proeng.2017.02.019" target="_blank" >http://dx.doi.org/10.1016/j.proeng.2017.02.019</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.proeng.2017.02.019" target="_blank" >10.1016/j.proeng.2017.02.019</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fired hydraulic binder based on fluidized combustion fly ash

Popis výsledku v původním jazyce

This study is focused on possibilities of utilization of fluidized combustion fly ash for manufacturing of fired hydraulic binders as one of the principal raw materials for production of binders close to traditional cements. As a basic raw material high-calcium limestone was used, which was subsequently mixed with fluidized combustion filter fly ash (FCFFA) and fluidized combustion bed fly ash (FCBFA). The selected value of the hydraulic module was 1.7. Total two two-component raw material mixture were prepared which were burnt in a laboratory furnace under conditions at temperature of 1200 °C and 1250 °C. The evaluation was done on the basis of mineralogical composition using X-Ray diffraction (XRD) analysis, determination of the chemical composition of clinker and achieved basic physical properties. The aim was to produce a binder which could be very similar to strongly hydraulic lime or to cements of lower strength classes.

Název v anglickém jazyce

Fired hydraulic binder based on fluidized combustion fly ash

Popis výsledku anglicky

This study is focused on possibilities of utilization of fluidized combustion fly ash for manufacturing of fired hydraulic binders as one of the principal raw materials for production of binders close to traditional cements. As a basic raw material high-calcium limestone was used, which was subsequently mixed with fluidized combustion filter fly ash (FCFFA) and fluidized combustion bed fly ash (FCBFA). The selected value of the hydraulic module was 1.7. Total two two-component raw material mixture were prepared which were burnt in a laboratory furnace under conditions at temperature of 1200 °C and 1250 °C. The evaluation was done on the basis of mineralogical composition using X-Ray diffraction (XRD) analysis, determination of the chemical composition of clinker and achieved basic physical properties. The aim was to produce a binder which could be very similar to strongly hydraulic lime or to cements of lower strength classes.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Modern Building Materials, Structures and Techniques, MBMST 2016

ISBN

—

ISSN

1877-7058

e-ISSN

—

Počet stran výsledku

6

Strana od-do

319-324

Název nakladatele

Elsevier

Místo vydání

Netherlands

Místo konání akce

Vilnius

Datum konání akce

26. 5. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000410919400041