Pinned joints – their design and real behavior

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F18%3APU126964" target="_blank" >RIV/00216305:26110/18:PU126964 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.icevirtuallibrary.com/doi/abs/10.1680/jencm.17.00003" target="_blank" >https://www.icevirtuallibrary.com/doi/abs/10.1680/jencm.17.00003</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1680/jencm.17.00003" target="_blank" >10.1680/jencm.17.00003</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Pinned joints – their design and real behavior

Popis výsledku v původním jazyce

Pinned joints are a basic type of mechanical joints for steel elements. They have been used in metal load-bearing structures since the middle of the 19th century. Due to their specific properties - the ability of the connected elements to rotate freely and the elimination of any bending moment transfer between the elements - pinned joints are designed for both steel and timber load-bearing structures. The EN 1993-1-8 standard lists simple rules for use when designing pinned joints. The procedures are based on design rules (recommendations) set out by E. Winkler in the 2nd half of the 19th century. In many layout and loading situations, such joints provide results which differ quite significantly from those obtained from precise numerical calculations or experiments. The contribution focuses on issues concerned with the design of pinned joints. It deals with the options for the application of the design rules contained in EN 1993-1-8 during the design of such joints, and compares the results of these options both with 3D numerical FEM models and with executed experimental measurements - load tests performed on joints. The obtained results for examples of specific joint layout and loading type are analyzed.

Název v anglickém jazyce

Pinned joints – their design and real behavior

Popis výsledku anglicky

Pinned joints are a basic type of mechanical joints for steel elements. They have been used in metal load-bearing structures since the middle of the 19th century. Due to their specific properties - the ability of the connected elements to rotate freely and the elimination of any bending moment transfer between the elements - pinned joints are designed for both steel and timber load-bearing structures. The EN 1993-1-8 standard lists simple rules for use when designing pinned joints. The procedures are based on design rules (recommendations) set out by E. Winkler in the 2nd half of the 19th century. In many layout and loading situations, such joints provide results which differ quite significantly from those obtained from precise numerical calculations or experiments. The contribution focuses on issues concerned with the design of pinned joints. It deals with the options for the application of the design rules contained in EN 1993-1-8 during the design of such joints, and compares the results of these options both with 3D numerical FEM models and with executed experimental measurements - load tests performed on joints. The obtained results for examples of specific joint layout and loading type are analyzed.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics

ISSN

1755-0777

e-ISSN

1755-0785

Svazek periodika

170

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

13

Strana od-do

154-166

Kód UT WoS článku

000425896300004

EID výsledku v databázi Scopus

2-s2.0-85042376340