The Protection of Masonry Blocks with Using Hydrophobization Before Load Due to Increased Moisture
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F18%3APU131443" target="_blank" >RIV/00216305:26110/18:PU131443 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.18517/ijaseit.8.6.5855" target="_blank" >http://dx.doi.org/10.18517/ijaseit.8.6.5855</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.18517/ijaseit.8.6.5855" target="_blank" >10.18517/ijaseit.8.6.5855</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
The Protection of Masonry Blocks with Using Hydrophobization Before Load Due to Increased Moisture
Popis výsledku v původním jazyce
On the Faculty of Civil Engineering (Brno University of Technology) is for several years being developed and researched properties of modern building materials. One of the areas is the development and modification of the properties of masonry elements. In last time was development focused also on masonry blocks that are able to withstand the increased moisture loads. These masonry blocks can be used as protection buildings in the flood areas or protection for building in the natural disasters time. Increased moisture can be one of the most common problems encountered in building structures. The most problems are with moisture in liquid form, which can have significant effects on changing properties of materials and structures. If is load the structure of brick blocks with moisture in liquid form occurs due to an open porosity and thereby also related to high water absorption, it leads very often to the change in the properties and reduce the service life of masonry blocks. This paper deals study of using special products based on silicone on the surface layer of ceramic masonry elements. With application this silicone agents is formed on surface of masonry blocks safety surface layer. Through this protection, hydrophobization, is masonry blocks protected before the effects of increased humidity. hydrophobization reduces the water absorption of masonry blocks and eliminates negative effect of the moisture on the properties of masonry blocks. Using hydrophobization masonry blocks can be very effective as preventive protection in case of failure or damage of conventional waterproofing measures.
Název v anglickém jazyce
The Protection of Masonry Blocks with Using Hydrophobization Before Load Due to Increased Moisture
Popis výsledku anglicky
On the Faculty of Civil Engineering (Brno University of Technology) is for several years being developed and researched properties of modern building materials. One of the areas is the development and modification of the properties of masonry elements. In last time was development focused also on masonry blocks that are able to withstand the increased moisture loads. These masonry blocks can be used as protection buildings in the flood areas or protection for building in the natural disasters time. Increased moisture can be one of the most common problems encountered in building structures. The most problems are with moisture in liquid form, which can have significant effects on changing properties of materials and structures. If is load the structure of brick blocks with moisture in liquid form occurs due to an open porosity and thereby also related to high water absorption, it leads very often to the change in the properties and reduce the service life of masonry blocks. This paper deals study of using special products based on silicone on the surface layer of ceramic masonry elements. With application this silicone agents is formed on surface of masonry blocks safety surface layer. Through this protection, hydrophobization, is masonry blocks protected before the effects of increased humidity. hydrophobization reduces the water absorption of masonry blocks and eliminates negative effect of the moisture on the properties of masonry blocks. Using hydrophobization masonry blocks can be very effective as preventive protection in case of failure or damage of conventional waterproofing measures.
Klasifikace
Druh
J<sub>SC</sub> - Článek v periodiku v databázi SCOPUS
CEP obor
—
OECD FORD obor
20101 - Civil engineering
Návaznosti výsledku
Projekt
Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2018
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
International Journal on Advanced Science, Engineering and Information Technology
ISSN
2088-5334
e-ISSN
2460-6952
Svazek periodika
8
Číslo periodika v rámci svazku
6
Stát vydavatele periodika
ID - Indonéská republika
Počet stran výsledku
8
Strana od-do
2435-2442
Kód UT WoS článku
—
EID výsledku v databázi Scopus
2-s2.0-85059528004