Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F21%3APU138505" target="_blank" >RIV/00216305:26110/21:PU138505 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.scientific.net/KEM.898.49" target="_blank" >https://www.scientific.net/KEM.898.49</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.898.49" target="_blank" >10.4028/www.scientific.net/KEM.898.49</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings
Popis výsledku v původním jazyce
The objective of presented research was to verify and evaluate whether the treated hazardous waste (HW) can be used as filler in polymer coatings based on epoxy (EP) and polyurethane resin (PUR). The end product created by the incineration of municipal waste and cement dusts from cement kiln bypasses were chosen for solidification. The hazardous waste used was solidified by a homogenisation method using filter fly ash from fluidized bed combustion of lignite and silica flour as the solidifying agents. The aim was to use as much hazardous waste as possible and incorporate it into the polymer matrix of the coatings. The usability of the filler prepared in this way was verified by testing the tensile properties of polymer coatings, the surface hardness and the adhesion to the concrete. The cohesion of the coatings with concrete was observed using a digital optical microscope. It has been found that the PUR-based coatings with HW content show better properties than the coatings containing only the silica flour as a filler.
Název v anglickém jazyce
Use of Specially Treated Hazardous Waste as Filler in Polymer Coatings
Popis výsledku anglicky
The objective of presented research was to verify and evaluate whether the treated hazardous waste (HW) can be used as filler in polymer coatings based on epoxy (EP) and polyurethane resin (PUR). The end product created by the incineration of municipal waste and cement dusts from cement kiln bypasses were chosen for solidification. The hazardous waste used was solidified by a homogenisation method using filter fly ash from fluidized bed combustion of lignite and silica flour as the solidifying agents. The aim was to use as much hazardous waste as possible and incorporate it into the polymer matrix of the coatings. The usability of the filler prepared in this way was verified by testing the tensile properties of polymer coatings, the surface hardness and the adhesion to the concrete. The cohesion of the coatings with concrete was observed using a digital optical microscope. It has been found that the PUR-based coatings with HW content show better properties than the coatings containing only the silica flour as a filler.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
—
OECD FORD obor
20506 - Coating and films
Návaznosti výsledku
Projekt
<a href="/cs/project/FV20303" target="_blank" >FV20303: Progresivní polymerní hmoty s využitím druhotných surovin a nebezpečných odpadů do chemicky silně agresivního prostředí</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2021
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Proceedings of the 22nd Conference on the Rehabilitation and Reconstruction of Buildings
ISBN
978-3-0357-1810-2
ISSN
1013-9826
e-ISSN
—
Počet stran výsledku
7
Strana od-do
49-55
Název nakladatele
Trans Tech Publications Ltd.
Místo vydání
Switzerland
Místo konání akce
Brno
Datum konání akce
19. 11. 2020
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—