Bond Properties of NHL-Based Mortars with Viscosity-Modifying Water-Retentive Admixtures

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F21%3APU141100" target="_blank" >RIV/00216305:26110/21:PU141100 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.mdpi.com/2075-163X/11/7/685" target="_blank" >https://www.mdpi.com/2075-163X/11/7/685</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/min11070685" target="_blank" >10.3390/min11070685</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Bond Properties of NHL-Based Mortars with Viscosity-Modifying Water-Retentive Admixtures

Popis výsledku v původním jazyce

This article studies the influence of biopolymeric viscosity-modifying admixtures with water-retentive function on the physico-mechanical properties of natural hydraulic lime-based mortars and their adherence to the traditional fired-clay brick substrate. The use of admixtures increases the water/binder ratio, which in turn leads to a decrease in the strength of the mortars. The viscosity-modifying function improves the adhesive strength between mortar and pre-wetter brick by increasing the binder paste viscosity, while the water-retentive function along with increased water content may lead to a decrease in adhesive strength. On the contrary, water retention and increased water content are beneficial on a dry surface, while paste viscosity plays only a minor role. When subjected to temperature-varying cycles, the mortars are more prone to in-mortar failure during the pull-off test. The air-entraining function of some admixtures improves the frost resistance of the mortars; however, it would negatively affect the adhesive strength by incorporating pores into the contact zone between the mortar and brick substrate. This study showed that the use of some of the studied admixtures may improve the adhesion of mortar to the brick substrate.

Název v anglickém jazyce

Bond Properties of NHL-Based Mortars with Viscosity-Modifying Water-Retentive Admixtures

Popis výsledku anglicky

This article studies the influence of biopolymeric viscosity-modifying admixtures with water-retentive function on the physico-mechanical properties of natural hydraulic lime-based mortars and their adherence to the traditional fired-clay brick substrate. The use of admixtures increases the water/binder ratio, which in turn leads to a decrease in the strength of the mortars. The viscosity-modifying function improves the adhesive strength between mortar and pre-wetter brick by increasing the binder paste viscosity, while the water-retentive function along with increased water content may lead to a decrease in adhesive strength. On the contrary, water retention and increased water content are beneficial on a dry surface, while paste viscosity plays only a minor role. When subjected to temperature-varying cycles, the mortars are more prone to in-mortar failure during the pull-off test. The air-entraining function of some admixtures improves the frost resistance of the mortars; however, it would negatively affect the adhesive strength by incorporating pores into the contact zone between the mortar and brick substrate. This study showed that the use of some of the studied admixtures may improve the adhesion of mortar to the brick substrate.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Minerals

ISSN

2075-163X

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

16

Strana od-do

1-16

Kód UT WoS článku

000676199600001

EID výsledku v databázi Scopus

2-s2.0-85108650584