Thermal performance of ceramic hollow brick modified with low emissivity coating

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26110%2F21%3APU143832" target="_blank" >RIV/00216305:26110/21:PU143832 - isvavai.cz</a>

Výsledek na webu

<a href="https://aip.scitation.org/doi/pdf/10.1063/5.0069605" target="_blank" >https://aip.scitation.org/doi/pdf/10.1063/5.0069605</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1063/5.0069605" target="_blank" >10.1063/5.0069605</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Thermal performance of ceramic hollow brick modified with low emissivity coating

Popis výsledku v původním jazyce

There are still requirements in the building energy research and thermal engineering field to incthermal performance of a building and its structural elements. Building envelope made of hollow ceramic bricks are widely used in building engineering for their thermal, acoustic, and structural properties. This type of building element can be considered as one of the most used technologies for the present walls of building envelopes in European region. Various aspects that affect the resulting geometry of brick hollows, changes in the configuration of cavities and currently also the application of filling material with low thermal conductivity may contribute to the increase of thermal properties of these bricks. Another potential approach and further improvements can be based on the reduction of heat loss during heat transfer through the brick cavities aimed at reducing heat transfer by thermal radiation. Therefore, the effect of low emissivity on the thermal performance of ceramic hollow brick is the key subject of this paper. For his reason, inner surfaces of brick cavities were modified with low emissivity coating, experimentally tested using a heat flow meter method and to provide a consequent numerical analysis. Results presented in this study reveals, that depending on the emissivity, the decrease of the thermal conductivity of up to 20% can be theoretically achieved when particular hollow bricks are modelled however this effectivity is not followed by experimental measurement. REFERENCES

Název v anglickém jazyce

Thermal performance of ceramic hollow brick modified with low emissivity coating

Popis výsledku anglicky

There are still requirements in the building energy research and thermal engineering field to incthermal performance of a building and its structural elements. Building envelope made of hollow ceramic bricks are widely used in building engineering for their thermal, acoustic, and structural properties. This type of building element can be considered as one of the most used technologies for the present walls of building envelopes in European region. Various aspects that affect the resulting geometry of brick hollows, changes in the configuration of cavities and currently also the application of filling material with low thermal conductivity may contribute to the increase of thermal properties of these bricks. Another potential approach and further improvements can be based on the reduction of heat loss during heat transfer through the brick cavities aimed at reducing heat transfer by thermal radiation. Therefore, the effect of low emissivity on the thermal performance of ceramic hollow brick is the key subject of this paper. For his reason, inner surfaces of brick cavities were modified with low emissivity coating, experimentally tested using a heat flow meter method and to provide a consequent numerical analysis. Results presented in this study reveals, that depending on the emissivity, the decrease of the thermal conductivity of up to 20% can be theoretically achieved when particular hollow bricks are modelled however this effectivity is not followed by experimental measurement. REFERENCES

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/GA20-00630S" target="_blank" >GA20-00630S: Klimaticky adaptivní prvky integrované ve vývoji energeticky a ekologicky efektivní obálky budovy</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Central European Symposium on Thermophysics 2021

ISBN

—

ISSN

0094-243X

e-ISSN

—

Počet stran výsledku

6

Strana od-do

„020003-1“-„020003-6“

Název nakladatele

AIP Publishing

Místo vydání

neuveden

Místo konání akce

Kazimierz Dolny

Datum konání akce

1. 9. 2021

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—