Creep nanostrukturního čistého niklu a jeho kompozitu připraveného elektrolytickým pokovováním
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F06%3APU64459" target="_blank" >RIV/00216305:26210/06:PU64459 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Creep testing of electrodeposited nickel and its particle-reinforced nanocomposite
Popis výsledku v původním jazyce
Nanocrystalline pure nickel and its particle-reinforced nanocomposite were produced by electrodeposition onto copper substrate under these conditions: direct current, 25 mA and 30 h. After electroplating, the copper substrate was metallographically ground out to obtain freestanding samples for the creep testing. The subject of study has been the evaluation of the creep characteristics of the electrodeposited unreinforced nickel and its nanocomposite reinforced by nano-sized SiO2 particles at temperatures in the range from 293 to 573 K. Fracture surfaces of the pure Ni and the composite after creep deformation were studied using SEM PHILIPS XL 30.
Název v anglickém jazyce
Creep testing of electrodeposited nickel and its particle-reinforced nanocomposite
Popis výsledku anglicky
Nanocrystalline pure nickel and its particle-reinforced nanocomposite were produced by electrodeposition onto copper substrate under these conditions: direct current, 25 mA and 30 h. After electroplating, the copper substrate was metallographically ground out to obtain freestanding samples for the creep testing. The subject of study has been the evaluation of the creep characteristics of the electrodeposited unreinforced nickel and its nanocomposite reinforced by nano-sized SiO2 particles at temperatures in the range from 293 to 573 K. Fracture surfaces of the pure Ni and the composite after creep deformation were studied using SEM PHILIPS XL 30.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JI - Kompositní materiály
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/GD106%2F05%2FH008" target="_blank" >GD106/05/H008: Víceúrovňový design pokrokových materiálů</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2006
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Nano 06
ISBN
80-214-3331-0
ISSN
—
e-ISSN
—
Počet stran výsledku
4
Strana od-do
277-280
Název nakladatele
VUT FSI v Brně
Místo vydání
Brno
Místo konání akce
Brno
Datum konání akce
13. 11. 2006
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—