Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F11%3APU95287" target="_blank" >RIV/00216305:26210/11:PU95287 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles

Popis výsledku v původním jazyce

High pressure descaling nozzles are used mainly for removing oxides from hot steel products. The homogeneity and intensity of water pressure distribution on the oxidised surface are very important characteristics for a description of nozzle characteristics. The higher the water impact is the more scales are removed and the surface is cleaner. The results of water impact depend not only on the used nozzle but also on the used water stabilizer and geometry of water chamber in which the nozzle with the stabilizer is mounted. To analyse the real water pressure distribution a special measuring device was used that enables us to scan pressure distribution of the spraying nozzle. Two different nozzles were used, each with a different construction of a stabilizer. The nozzles with the stabilizers were mounted in the water chambers with different geometries. It was confirmed that water chamber geometry has a slight effect on water pressure distribution. It was also found that for some geometry of the stabilizer the water chamber geometry has a bigger effect and for some smaller. The measured values are also compared with numerical simulations in the water chamber and the stabilizer.

Název v anglickém jazyce

Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles

Popis výsledku anglicky

High pressure descaling nozzles are used mainly for removing oxides from hot steel products. The homogeneity and intensity of water pressure distribution on the oxidised surface are very important characteristics for a description of nozzle characteristics. The higher the water impact is the more scales are removed and the surface is cleaner. The results of water impact depend not only on the used nozzle but also on the used water stabilizer and geometry of water chamber in which the nozzle with the stabilizer is mounted. To analyse the real water pressure distribution a special measuring device was used that enables us to scan pressure distribution of the spraying nozzle. Two different nozzles were used, each with a different construction of a stabilizer. The nozzles with the stabilizers were mounted in the water chambers with different geometries. It was confirmed that water chamber geometry has a slight effect on water pressure distribution. It was also found that for some geometry of the stabilizer the water chamber geometry has a bigger effect and for some smaller. The measured values are also compared with numerical simulations in the water chamber and the stabilizer.

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Experimental Fluid Mechanics 2011

ISBN

978-80-7372-784-0

ISSN

—

e-ISSN

—

Počet stran výsledku

11

Strana od-do

394-404

Název nakladatele

Neuveden

Místo vydání

Jičín

Místo konání akce

Jičín

Datum konání akce

22. 11. 2011

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—