Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6-4 Bearing Steels under Partial Heating Conditions

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F12%3APU103067" target="_blank" >RIV/00216305:26210/12:PU103067 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.mrs-serbia.org.rs/index.php/publications" target="_blank" >http://www.mrs-serbia.org.rs/index.php/publications</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6-4 Bearing Steels under Partial Heating Conditions

Popis výsledku v původním jazyce

The forming process is associated with the plastic deformation capability of materials. The formability of metals and alloys is influenced by physical-metallurgical properties of material and by external forming conditions, forming temperature in particular. A kind of borderline for the division of forming is the recrystallization temperature, according to which forming is divided into cold forming, partially hot forming and hot forming. The paper is concerned with problems of optimizing the temperatureof forming grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel under partial heating. Experimental establishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behaviour of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of grade 100CrMo7-3

Název v anglickém jazyce

Estabilishing of Optimum Forming Temterature on 100CrMo7-3 and 100CrMnSi6-4 Bearing Steels under Partial Heating Conditions

Popis výsledku anglicky

The forming process is associated with the plastic deformation capability of materials. The formability of metals and alloys is influenced by physical-metallurgical properties of material and by external forming conditions, forming temperature in particular. A kind of borderline for the division of forming is the recrystallization temperature, according to which forming is divided into cold forming, partially hot forming and hot forming. The paper is concerned with problems of optimizing the temperatureof forming grade 100CrMo7-3 and 100CrMnSi6-4 bearing steel under partial heating. Experimental establishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behaviour of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of grade 100CrMo7-3

Druh

O - Ostatní výsledky

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/ED1.1.00%2F02.0068" target="_blank" >ED1.1.00/02.0068: CEITEC - central european institute of technology</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů