Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F16%3APU118318" target="_blank" >RIV/00216305:26210/16:PU118318 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.832.231" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/AMM.832.231</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.832.231" target="_blank" >10.4028/www.scientific.net/AMM.832.231</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis

Popis výsledku v původním jazyce

This paper deals with a use of CFD modelling for optimization of supply of secondary combustion air in the two-chamber biomass boiler combusting very wet biomass (capacity ca. 200 kW). Objective of the analysis is to observe the impact of a diameter of a secondary air supply pipe and air flow velocity on mixing of the secondary air with flue gas in the combustion chamber. The numerical model of the experimental boiler was built for subsequent utilization of CFD computation based on the finite element method. The commercial code STAR-CD was used for development of parametrical studies. Series of calculations were carried out for four different diameters of air distribution pipes and for three different air velocities in a distribution orifice. Quality of air dispersion in flue gas flow was assessed in the vertical cross section lead at the end of the combustion chamber. The results of calculation were verified on the experimental installation of the boiler. Influence of secondary air mixing on emission production was measured and analysed. Emissions of pollutants for recommended air distribution comply with emission limits stipulated in the most stringent class 5 according to ČSN-EN 303-5 as well as with emission limits under Regulation No. 405/2012 Sb.

Název v anglickém jazyce

Optimization of Secondary Air Distribution in Biomass Boiler by CFD Analysis

Popis výsledku anglicky

This paper deals with a use of CFD modelling for optimization of supply of secondary combustion air in the two-chamber biomass boiler combusting very wet biomass (capacity ca. 200 kW). Objective of the analysis is to observe the impact of a diameter of a secondary air supply pipe and air flow velocity on mixing of the secondary air with flue gas in the combustion chamber. The numerical model of the experimental boiler was built for subsequent utilization of CFD computation based on the finite element method. The commercial code STAR-CD was used for development of parametrical studies. Series of calculations were carried out for four different diameters of air distribution pipes and for three different air velocities in a distribution orifice. Quality of air dispersion in flue gas flow was assessed in the vertical cross section lead at the end of the combustion chamber. The results of calculation were verified on the experimental installation of the boiler. Influence of secondary air mixing on emission production was measured and analysed. Emissions of pollutants for recommended air distribution comply with emission limits stipulated in the most stringent class 5 according to ČSN-EN 303-5 as well as with emission limits under Regulation No. 405/2012 Sb.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20704 - Energy and fuels

Projekt

<a href="/cs/project/LO1202" target="_blank" >LO1202: NETME CENTRE PLUS</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Applied Mechanics and Materials

ISSN

1662-7482

e-ISSN

—

Svazek periodika

832

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

7

Strana od-do

231-237

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—