SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F18%3APU128039" target="_blank" >RIV/00216305:26210/18:PU128039 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER

Popis výsledku v původním jazyce

This article deals with the secondary cooling in a continuous caster. In particular, it deals with homogeneity / inhomogeneity in places where surface of slab is partial shielded by rollers and bearing pocket between rollers. Influence of gap between rollers was also considered. Homogeneity of cooling intensity distribution was experimentally studied in two stages (cold and hot tests). In the first stage (cold tests) water flow and water distribution was observed optically using a transparent board with studied surface structures (rollers and bearing pockets). In the second stage (hot tests) the cooling tests with steel plate (fitted with studied structures) were performed. Cooling homogeneity were studied based on temperature distribution of the non-cooled side of sample, which was recorded by infrared camera.

Název v anglickém jazyce

SECONDARY COOLING OVERLAPPED WITH BEARING HOUSING IN A CONTINUOUS CASTER

Popis výsledku anglicky

This article deals with the secondary cooling in a continuous caster. In particular, it deals with homogeneity / inhomogeneity in places where surface of slab is partial shielded by rollers and bearing pocket between rollers. Influence of gap between rollers was also considered. Homogeneity of cooling intensity distribution was experimentally studied in two stages (cold and hot tests). In the first stage (cold tests) water flow and water distribution was observed optically using a transparent board with studied surface structures (rollers and bearing pockets). In the second stage (hot tests) the cooling tests with steel plate (fitted with studied structures) were performed. Cooling homogeneity were studied based on temperature distribution of the non-cooled side of sample, which was recorded by infrared camera.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20303 - Thermodynamics

Projekt

<a href="/cs/project/LO1202" target="_blank" >LO1202: NETME CENTRE PLUS</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Sborník konference METAL 2018

ISBN

978-80-87294-83-3

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

1-6

Název nakladatele

Tanger, Ostrava

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

23. 5. 2018

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000461832200008