Abrasion of Magnetorheological Fluids

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F19%3APU132201" target="_blank" >RIV/00216305:26210/19:PU132201 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.21495/71-0-169" target="_blank" >http://dx.doi.org/10.21495/71-0-169</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21495/71-0-169" target="_blank" >10.21495/71-0-169</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Abrasion of Magnetorheological Fluids

Popis výsledku v původním jazyce

This paper deals with the study of the abrasive effect of commercial magnetorheological (MR) fluids on steel material. The tests were performed on a tribometer with a pin-on-plate configuration; the sample was flooded with the examined fluid. The rate of abrasion, caused by MR fluids and hydraulic oil, was compared. The difference among the tested MR fluids has been shown to be minimal and the abrasion is approximately twice as large as when using hydraulic oil. The results are beneficial for the development of MR dampers, a material with a higher resistance against abrasion wear must be used for a hydraulic tube. Furthermore, the testing procedure and test conditions were established and thus this test can be repeated with new materials until the abrasion is not as extensive as that with hydraulic oil.

Název v anglickém jazyce

Abrasion of Magnetorheological Fluids

Popis výsledku anglicky

This paper deals with the study of the abrasive effect of commercial magnetorheological (MR) fluids on steel material. The tests were performed on a tribometer with a pin-on-plate configuration; the sample was flooded with the examined fluid. The rate of abrasion, caused by MR fluids and hydraulic oil, was compared. The difference among the tested MR fluids has been shown to be minimal and the abrasion is approximately twice as large as when using hydraulic oil. The results are beneficial for the development of MR dampers, a material with a higher resistance against abrasion wear must be used for a hydraulic tube. Furthermore, the testing procedure and test conditions were established and thus this test can be repeated with new materials until the abrasion is not as extensive as that with hydraulic oil.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20302 - Applied mechanics

Projekt

<a href="/cs/project/GC17-10660J" target="_blank" >GC17-10660J: Výzkum magnetoreologické kapaliny s vysokou sedimentační stabilitou</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Engineering Mechanics 2019, 25th International Conference

ISBN

978-80-87012-71-0

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

169-172

Název nakladatele

Institute of Thermomechanics of the Czech Academy of Sciences

Místo vydání

Praha

Místo konání akce

Svratka

Datum konání akce

13. 5. 2019

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

000613255300037