Characterization of beta-Ti Alloy Prepared by SLM Method

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F20%3APU147660" target="_blank" >RIV/00216305:26210/20:PU147660 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.journalmt.com/artkey/mft-202005-0018_characterization-of-946-ti-alloy-prepared-by-slm-method.php" target="_blank" >https://www.journalmt.com/artkey/mft-202005-0018_characterization-of-946-ti-alloy-prepared-by-slm-method.php</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/mft.2020.091" target="_blank" >10.21062/mft.2020.091</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Characterization of beta-Ti Alloy Prepared by SLM Method

Popis výsledku v původním jazyce

Ti-6Al-4V alloy is the most commercially used material for the production of orthopedic implants. However, despite its excellent properties, it is not an ideal material for use in medicine in terms of vanadium toxicity and relatively high modulus of elasticity. Titanium beta-alloys could be a suitable replacement in future years for Ti-6Al-4V alloy, as they have a lower modulus of elasticity and contain non-toxic elements. Some of the alloying elements may even increase the biocompatibility of the alloy. In addition, a progressive 3D printing method would allow custom-made implants with the required properties to be printed. The aim of this work was to characterize the beta alloy Ti-30Nb by Selective Laser Melting (SLM) method and to determine its mechanical properties. In addition, heat treatment was applied in order to homogenize the structure. Ti-30Nb alloy was compared in as-built state and in annealed state.

Název v anglickém jazyce

Characterization of beta-Ti Alloy Prepared by SLM Method

Popis výsledku anglicky

Ti-6Al-4V alloy is the most commercially used material for the production of orthopedic implants. However, despite its excellent properties, it is not an ideal material for use in medicine in terms of vanadium toxicity and relatively high modulus of elasticity. Titanium beta-alloys could be a suitable replacement in future years for Ti-6Al-4V alloy, as they have a lower modulus of elasticity and contain non-toxic elements. Some of the alloying elements may even increase the biocompatibility of the alloy. In addition, a progressive 3D printing method would allow custom-made implants with the required properties to be printed. The aim of this work was to characterize the beta alloy Ti-30Nb by Selective Laser Melting (SLM) method and to determine its mechanical properties. In addition, heat treatment was applied in order to homogenize the structure. Ti-30Nb alloy was compared in as-built state and in annealed state.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2020

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing TECHNOLOGY

ISSN

1213-2489

e-ISSN

—

Svazek periodika

20

Číslo periodika v rámci svazku

5

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

690-696

Kód UT WoS článku

000859945700018

EID výsledku v databázi Scopus

2-s2.0-85100152833