Beneficial osseointegration effect of hydroxyapatite coating on cranial implant - FEM investigation

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F21%3APU141311" target="_blank" >RIV/00216305:26210/21:PU141311 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/61389021:_____/21:00544748

Výsledek na webu

<a href="https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0254837" target="_blank" >https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0254837</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1371/journal.pone.0254837" target="_blank" >10.1371/journal.pone.0254837</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Beneficial osseointegration effect of hydroxyapatite coating on cranial implant - FEM investigation

Popis výsledku v původním jazyce

A firm connection of the bone-implant-fixation system is of utmost importance for patients with cranial defects. In order to improve the connection reliability, the current research focuses on finding the optimal fixation method, as well as selection of the implant manufacturing methods and the used materials. For the latter, implementation of bioactive materials such as hydroxyapatite or other calcium phosphates has also been considered in the literature. The aim of this study was to investigate the effect of gradual osseointegration on the biomechanical performance of cranial Ti6Al4V implants with a deposited HA coating as the osseointegration agent. This effect was assessed by two different computational approaches using finite element method (FEM) modeling. The values of key input parameters necessary for FEM were obtained from experimental plasma spray deposition of HA layers onto Ti6Al4V samples. Immediately upon implantation, the HA layer at the bone-implant contact area brought only a slight decrease in the values of von Mises stress in the implant and the micro-screws when compared to a non-coated counterpart; importantly, this was without any negative trade-off in other important characteristics. The major benefit of the HA coatings was manifested upon the modeled osseointegration: the results of both approaches confirmed a significant reduction of investigated parameters such as the total implant displacements (reduced from 0.050 mm to 0.012 mm and 0.002 mm while using Approach I and II, respectively) and stresses (reduced from 52 MPa to 10 MPa and 1 MPa) in the implanted components in comparison to non-coated variant. This is a very promising result for potential use of thermally sprayed HA coatings for cranial implants.

Název v anglickém jazyce

Beneficial osseointegration effect of hydroxyapatite coating on cranial implant - FEM investigation

Popis výsledku anglicky

A firm connection of the bone-implant-fixation system is of utmost importance for patients with cranial defects. In order to improve the connection reliability, the current research focuses on finding the optimal fixation method, as well as selection of the implant manufacturing methods and the used materials. For the latter, implementation of bioactive materials such as hydroxyapatite or other calcium phosphates has also been considered in the literature. The aim of this study was to investigate the effect of gradual osseointegration on the biomechanical performance of cranial Ti6Al4V implants with a deposited HA coating as the osseointegration agent. This effect was assessed by two different computational approaches using finite element method (FEM) modeling. The values of key input parameters necessary for FEM were obtained from experimental plasma spray deposition of HA layers onto Ti6Al4V samples. Immediately upon implantation, the HA layer at the bone-implant contact area brought only a slight decrease in the values of von Mises stress in the implant and the micro-screws when compared to a non-coated counterpart; importantly, this was without any negative trade-off in other important characteristics. The major benefit of the HA coatings was manifested upon the modeled osseointegration: the results of both approaches confirmed a significant reduction of investigated parameters such as the total implant displacements (reduced from 0.050 mm to 0.012 mm and 0.002 mm while using Approach I and II, respectively) and stresses (reduced from 52 MPa to 10 MPa and 1 MPa) in the implanted components in comparison to non-coated variant. This is a very promising result for potential use of thermally sprayed HA coatings for cranial implants.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10700 - Other natural sciences

Projekt

<a href="/cs/project/GA19-10246S" target="_blank" >GA19-10246S: Depoziční mechanismy a vlastnosti vícefázových plazmových nástřiků připravených s pomocí kapalné fáze</a><br>

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

PLOS ONE

ISSN

1932-6203

e-ISSN

—

Svazek periodika

16

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

16

Strana od-do

„e0254837“-„e0254837“

Kód UT WoS článku

000678122000004

EID výsledku v databázi Scopus

2-s2.0-85110779980