THE INFLUENCE OF GRAPHITE INOCULANTS AND WALL THICKNESS OF THE CASTINGS FROM NODULAR GRAPHITE CAST IRON ON THE STRUCTURE AND MECHANICAL PROPERTIES

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F21%3APU147648" target="_blank" >RIV/00216305:26210/21:PU147648 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.37904/metal.2021.4074" target="_blank" >http://dx.doi.org/10.37904/metal.2021.4074</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.37904/metal.2021.4074" target="_blank" >10.37904/metal.2021.4074</a>

Jazyk výsledku

angličtina

Název v původním jazyce

THE INFLUENCE OF GRAPHITE INOCULANTS AND WALL THICKNESS OF THE CASTINGS FROM NODULAR GRAPHITE CAST IRON ON THE STRUCTURE AND MECHANICAL PROPERTIES

Popis výsledku v původním jazyce

The research examined the influence of different kinds of graphite inoculants when casting nodular cast iron on the structure and mechanical properties of the castings. The test alloy was a nodular cast iron corresponding with the ČSN EN GJS 450 standard. The modification was done with a VM 63M alloy by a Sandwich method. A comparison was made of the inoculating effects of 3 sorts of inoculants applied by a single-stage modification. Test moulds samples of Y1-Y4 type complying with the ČSN EN 1563 standard were cast. These samples were tested for their mechanical properties using the tensile, hardness and impact tests. A metallographic evaluation of the graphite and basic metal structure was made for all the samples.

Název v anglickém jazyce

THE INFLUENCE OF GRAPHITE INOCULANTS AND WALL THICKNESS OF THE CASTINGS FROM NODULAR GRAPHITE CAST IRON ON THE STRUCTURE AND MECHANICAL PROPERTIES

Popis výsledku anglicky

The research examined the influence of different kinds of graphite inoculants when casting nodular cast iron on the structure and mechanical properties of the castings. The test alloy was a nodular cast iron corresponding with the ČSN EN GJS 450 standard. The modification was done with a VM 63M alloy by a Sandwich method. A comparison was made of the inoculating effects of 3 sorts of inoculants applied by a single-stage modification. Test moulds samples of Y1-Y4 type complying with the ČSN EN 1563 standard were cast. These samples were tested for their mechanical properties using the tensile, hardness and impact tests. A metallographic evaluation of the graphite and basic metal structure was made for all the samples.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

METAL 2021

ISBN

978-80-87294-99-4

ISSN

—

e-ISSN

—

Počet stran výsledku

7

Strana od-do

108-114

Název nakladatele

TANGER spol. s r.o.

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

26. 5. 2021

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—