Experimental validation of the operation of tilting-pad journal bearing lubricated by high-test peroxide under excessive vibrations and reduced flow of the lubricant
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F23%3APU148154" target="_blank" >RIV/00216305:26210/23:PU148154 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.sciencedirect.com/science/article/pii/S0043164823001849" target="_blank" >https://www.sciencedirect.com/science/article/pii/S0043164823001849</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1016/j.wear.2023.204801" target="_blank" >10.1016/j.wear.2023.204801</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Experimental validation of the operation of tilting-pad journal bearing lubricated by high-test peroxide under excessive vibrations and reduced flow of the lubricant
Popis výsledku v původním jazyce
Hydrogen peroxide is commonly used as a low-toxicity liquid rocket propellant (oxidizer). Hydrodynamic bearings lubricated by this propellant may be applicable in rocket engine pumps. In this paper, a hydrodynamic tilting-pad journal bearing lubricated by highly concentrated (87wt%) hydrogen peroxide was proposed. Furthermore, an experimental validation of the performance of this bearing with pads made of PEEK material (polyetheretherketone) was carried out on the developed high-speed measuring device. To verify the endurance of this bearing, measurements were performed at different peroxide flow rates from 100% to 20% of the nominal flow rate. The tests were also conducted under excessive vibrations induced by the misalignment of the test rotor with the drive connected by a flexible coupling. In addition to vibration measurement, the wear of the bearing sliding surfaces and lubricant temperature variations were evaluated. The measured results were compared with the calculated data. For this purpose, a two-dimensional computational model based on the thermo-elasto-hydrodynamic lubrication theory was presented. To improve the solution convergence, Newton's method was used to calculate the equilibrium tilt of the pads. The involved bearings operated smoothly at the mentioned misalignment even at 20% peroxide flow, only slight foaming occurred at the outlet.
Název v anglickém jazyce
Experimental validation of the operation of tilting-pad journal bearing lubricated by high-test peroxide under excessive vibrations and reduced flow of the lubricant
Popis výsledku anglicky
Hydrogen peroxide is commonly used as a low-toxicity liquid rocket propellant (oxidizer). Hydrodynamic bearings lubricated by this propellant may be applicable in rocket engine pumps. In this paper, a hydrodynamic tilting-pad journal bearing lubricated by highly concentrated (87wt%) hydrogen peroxide was proposed. Furthermore, an experimental validation of the performance of this bearing with pads made of PEEK material (polyetheretherketone) was carried out on the developed high-speed measuring device. To verify the endurance of this bearing, measurements were performed at different peroxide flow rates from 100% to 20% of the nominal flow rate. The tests were also conducted under excessive vibrations induced by the misalignment of the test rotor with the drive connected by a flexible coupling. In addition to vibration measurement, the wear of the bearing sliding surfaces and lubricant temperature variations were evaluated. The measured results were compared with the calculated data. For this purpose, a two-dimensional computational model based on the thermo-elasto-hydrodynamic lubrication theory was presented. To improve the solution convergence, Newton's method was used to calculate the equilibrium tilt of the pads. The involved bearings operated smoothly at the mentioned misalignment even at 20% peroxide flow, only slight foaming occurred at the outlet.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20301 - Mechanical engineering
Návaznosti výsledku
Projekt
<a href="/cs/project/TK04030262" target="_blank" >TK04030262: Plynem mazaná aerodynamická ložiska pro použití ve vodíkových a jiných vysokootáčkových aplikacích</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2023
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
WEAR
ISSN
0043-1648
e-ISSN
1873-2577
Svazek periodika
523
Číslo periodika v rámci svazku
6
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
13
Strana od-do
„“-„“
Kód UT WoS článku
000982274300001
EID výsledku v databázi Scopus
2-s2.0-85151434532