Novel Second-Order Transfer Section for Frequency-Selective Response Generation in Comb Filters

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26220%2F25%3APU156227" target="_blank" >RIV/00216305:26220/25:PU156227 - isvavai.cz</a>

Výsledek na webu

<a href="https://ieeexplore.ieee.org/abstract/document/10916844" target="_blank" >https://ieeexplore.ieee.org/abstract/document/10916844</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1109/TIM.2025.3548818" target="_blank" >10.1109/TIM.2025.3548818</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Novel Second-Order Transfer Section for Frequency-Selective Response Generation in Comb Filters

Popis výsledku v původním jazyce

This article introduces a novel unified second-order filtering topology for standard band-reject (sBR) and inverting band-reject filter, enabling selective response generation. It is applied in the design of special comb filters that allow attenuation as well as amplification of specific bands. The presented solution offers several advantageous features in topology, enhanced cascadability, better parameter-setting performance, and the use of readily available off-the-shelf components, all while reducing overall costs. This is a significant improvement compared to the previous solutions in this field, which relied on a very expensive CMOS process. The topology employs a combination of an operational transconductance amplifier (OTA) and a current feedback amplifier. The intended center frequencies and transfer values of the comb filter are set to 50 Hz (-20 dB), 1 kHz (+26 dB), 10 kHz (+17 dB), and 100 kHz (-30 dB). The comb filter was experimentally verified via simulations as well as laboratory measurements utilizing LT1228 devices in a fabricated prototype.

Název v anglickém jazyce

Novel Second-Order Transfer Section for Frequency-Selective Response Generation in Comb Filters

Popis výsledku anglicky

This article introduces a novel unified second-order filtering topology for standard band-reject (sBR) and inverting band-reject filter, enabling selective response generation. It is applied in the design of special comb filters that allow attenuation as well as amplification of specific bands. The presented solution offers several advantageous features in topology, enhanced cascadability, better parameter-setting performance, and the use of readily available off-the-shelf components, all while reducing overall costs. This is a significant improvement compared to the previous solutions in this field, which relied on a very expensive CMOS process. The topology employs a combination of an operational transconductance amplifier (OTA) and a current feedback amplifier. The intended center frequencies and transfer values of the comb filter are set to 50 Hz (-20 dB), 1 kHz (+26 dB), 10 kHz (+17 dB), and 100 kHz (-30 dB). The comb filter was experimentally verified via simulations as well as laboratory measurements utilizing LT1228 devices in a fabricated prototype.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20201 - Electrical and electronic engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2025

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

ISSN

0018-9456

e-ISSN

1557-9662

Svazek periodika

74

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

9

Strana od-do

1-9

Kód UT WoS článku

001455427800018

EID výsledku v databázi Scopus

2-s2.0-105001522452