Analýza produktů klouzavého obloukového výboje pomocí technikz SPME

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26310%2F05%3APU51153" target="_blank" >RIV/00216305:26310/05:PU51153 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Solid Phase Microextraction Analysis of the Gliding Arc Discharge Products

Popis výsledku v původním jazyce

This work was indeed on the studies of gliding arc plasma discharge with respect to its use in decomposition of volatile organic compounds and on the solid phase microextraction analysis of the discharge products. The simple one stage gliding arc reactorwas used for these experiments. The applied voltage generating the discharge was varied in the range of 3.5 - 4 kV, the dry air and its mixtures with nitrogen, oxygen and argon were used as carrier gas, with flow rate of 1000 - 1600 ml/min. The toluene was used as a model VOC and its maximal decomposition of 73 % was achieved at the oxygen content in carrier gas of 60 %. For measurements with air as a carrier gas, the maximum removal efficiency was 68 %. The exhaust gas was sampled during these experi ments by solid phase extraction technique (sorption tubes) and analyzed by gas chromatography linked to the mass spectrometry. The other part of study was focused on the applicability study of solid phase microextraction technique for the

Název v anglickém jazyce

Solid Phase Microextraction Analysis of the Gliding Arc Discharge Products

Popis výsledku anglicky

This work was indeed on the studies of gliding arc plasma discharge with respect to its use in decomposition of volatile organic compounds and on the solid phase microextraction analysis of the discharge products. The simple one stage gliding arc reactorwas used for these experiments. The applied voltage generating the discharge was varied in the range of 3.5 - 4 kV, the dry air and its mixtures with nitrogen, oxygen and argon were used as carrier gas, with flow rate of 1000 - 1600 ml/min. The toluene was used as a model VOC and its maximal decomposition of 73 % was achieved at the oxygen content in carrier gas of 60 %. For measurements with air as a carrier gas, the maximum removal efficiency was 68 %. The exhaust gas was sampled during these experi ments by solid phase extraction technique (sorption tubes) and analyzed by gas chromatography linked to the mass spectrometry. The other part of study was focused on the applicability study of solid phase microextraction technique for the

Druh

D - Stať ve sborníku

CEP obor

BL - Fyzika plasmatu a výboje v plynech

OECD FORD obor

—

Projekt

<a href="/cs/project/GD202%2F03%2FH162" target="_blank" >GD202/03/H162: Pokročilé směry ve fyzice a chemii plazmatu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2005

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of Week of Doctoral Students, Part II

ISBN

80-86732-59-2

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

423-428

Název nakladatele

Matfyzpress

Místo vydání

Praha

Místo konání akce

Praha

Datum konání akce

7. 6. 2005

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—