Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26620%2F16%3APU121325" target="_blank" >RIV/00216305:26620/16:PU121325 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths

Popis výsledku v původním jazyce

Electrochemical process of conversion coatings formation on Zn-Ti alloy surface during one-step anodizing process was studied in NaOH and KOH electrolytes over the range of voltages (4-50 V) and constant time in order to investigate parameters for the origin of anodic zinc coating. Stainless steel was used as a counter electrode and electrolyte during the anodizing process was agitated by compressed air. Coatings microstructures and morphology were characterized by means of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Surface topography was investigated prior and after the anodizing using non-contact optical 3D profilometer. It was found that high voltage (50 V) and low concentrations of electrolyte (0.04 and 0.1 mol/L NaOH) led to origin of white coloured oxide coatings, while lower voltage (4 and 6 V) and higher concentrations of electrolyte promote the origin of black coloured oxide coatings. Concentration of electrolyte and voltage influenced the thickness of

Název v anglickém jazyce

Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths

Popis výsledku anglicky

Electrochemical process of conversion coatings formation on Zn-Ti alloy surface during one-step anodizing process was studied in NaOH and KOH electrolytes over the range of voltages (4-50 V) and constant time in order to investigate parameters for the origin of anodic zinc coating. Stainless steel was used as a counter electrode and electrolyte during the anodizing process was agitated by compressed air. Coatings microstructures and morphology were characterized by means of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Surface topography was investigated prior and after the anodizing using non-contact optical 3D profilometer. It was found that high voltage (50 V) and low concentrations of electrolyte (0.04 and 0.1 mol/L NaOH) led to origin of white coloured oxide coatings, while lower voltage (4 and 6 V) and higher concentrations of electrolyte promote the origin of black coloured oxide coatings. Concentration of electrolyte and voltage influenced the thickness of

Druh

O - Ostatní výsledky

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

<a href="/cs/project/LQ1601" target="_blank" >LQ1601: CEITEC 2020</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů