Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26620%2F21%3APU143809" target="_blank" >RIV/00216305:26620/21:PU143809 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/62156489:43210/21:43920570

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S2352940721003164?via%3Dihub" target="_blank" >https://www.sciencedirect.com/science/article/pii/S2352940721003164?via%3Dihub</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.apmt.2021.101253" target="_blank" >10.1016/j.apmt.2021.101253</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing

Popis výsledku v původním jazyce

3D printing is a very useful manufacturing method for the fabrication of electrochemical devices. Typically, accessible fused filament fabrication (FFF) is the most used method; but it is limited to the materials of use, mainly to carbon/polylactic acid blend. The use of metal 3D printed devices produced by FFF would offer very useful combination of advantages such as robustness, and electrocatalytic surfaces at a low cost. Here, 3D printed copper electrodes were successfully prepared by FFF followed by a sintering step. The physical and electrochemical properties of FFF 3D printed copper electrodes were characterised using various complementary techniques, while the electrochemical performance was evaluated for the non-enzymatic sensing of glucose as a first demonstration of applicability. Such low-cost 3D-printing method for fabrication of metallic electrodes will be further applicable for a wide variety of devices. (c) 2021 Elsevier Ltd. All rights reserved.

Název v anglickém jazyce

Fully metallic copper 3D-printed electrodes via sintering for electrocatalytic biosensing

Popis výsledku anglicky

3D printing is a very useful manufacturing method for the fabrication of electrochemical devices. Typically, accessible fused filament fabrication (FFF) is the most used method; but it is limited to the materials of use, mainly to carbon/polylactic acid blend. The use of metal 3D printed devices produced by FFF would offer very useful combination of advantages such as robustness, and electrocatalytic surfaces at a low cost. Here, 3D printed copper electrodes were successfully prepared by FFF followed by a sintering step. The physical and electrochemical properties of FFF 3D printed copper electrodes were characterised using various complementary techniques, while the electrochemical performance was evaluated for the non-enzymatic sensing of glucose as a first demonstration of applicability. Such low-cost 3D-printing method for fabrication of metallic electrodes will be further applicable for a wide variety of devices. (c) 2021 Elsevier Ltd. All rights reserved.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10405 - Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis)

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Applied Materials Today

ISSN

2352-9407

e-ISSN

—

Svazek periodika

25

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

6

Strana od-do

„101253-1“-„101253-6“

Kód UT WoS článku

000719819700004

EID výsledku v databázi Scopus

2-s2.0-85118957555