New generation of ODS alloys
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26316919%3A_____%2F19%3AN0000057" target="_blank" >RIV/26316919:_____/19:N0000057 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.scientific.net/KEM.810.113" target="_blank" >https://www.scientific.net/KEM.810.113</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.810.113" target="_blank" >10.4028/www.scientific.net/KEM.810.113</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
New generation of ODS alloys
Popis výsledku v původním jazyce
Excellent creep strength of ODS steels is due to "sticking" of dislocations at nano-oxides. The aim of this study is to explore the Fe-Al-O and Fe-Al-Cr-Y-O systems with high oxygen content (up to 1.5 wt %) represented by alumina or yttria oxides (up to 5 vol. %) to identify the potentials of the new generation of ODS alloys. The basic material is prepared from Fe and 10 or 11 wt. % of Al. Theoretical models showed stability of Al oxides even above 1000°C, while practical results show coarsening with time at these temperatures. Stability of Y oxides is about 200°C higher, so there is a potential to have stable creep resistant alloy in range of 1000-1200°C.
Název v anglickém jazyce
New generation of ODS alloys
Popis výsledku anglicky
Excellent creep strength of ODS steels is due to "sticking" of dislocations at nano-oxides. The aim of this study is to explore the Fe-Al-O and Fe-Al-Cr-Y-O systems with high oxygen content (up to 1.5 wt %) represented by alumina or yttria oxides (up to 5 vol. %) to identify the potentials of the new generation of ODS alloys. The basic material is prepared from Fe and 10 or 11 wt. % of Al. Theoretical models showed stability of Al oxides even above 1000°C, while practical results show coarsening with time at these temperatures. Stability of Y oxides is about 200°C higher, so there is a potential to have stable creep resistant alloy in range of 1000-1200°C.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
—
OECD FORD obor
20501 - Materials engineering
Návaznosti výsledku
Projekt
<a href="/cs/project/LO1412" target="_blank" >LO1412: Rozvoj Západočeského materiálově metalurgického Centra</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2019
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Conference on New Methods of Damage and Failure Analysis of Structural Parts, 2018
ISBN
978-303571447-0
ISSN
—
e-ISSN
—
Počet stran výsledku
6
Strana od-do
113-118
Název nakladatele
Trans Tech Publications Ltd
Místo vydání
Curych
Místo konání akce
Ostrava
Datum konání akce
10. 9. 2018
Typ akce podle státní příslušnosti
WRD - Celosvětová akce
Kód UT WoS článku
—